How to Remove and Replace a SPARC T5-1B and Netra T5-1B USB Flash Drive:ATR:1530449.1:0

Asset ID:	1-71-1530449.1
Update Date:	2017-03-29
Keywords:

Solution Type Technical Instruction Sure

Solution 1530449.1 : How to Remove and Replace a SPARC T5-1B and Netra T5-1B USB Flash Drive:ATR:1530449.1:0

Applies to:

SPARC T5-1B - Version All Versions and later
Sun Blade 6000 System - Version All Versions and later
Netra SPARC T5-1B Server Module - Version All Versions and later
Information in this document applies to any platform.

Goal

How to Remove and Replace a SPARC T5-1B USB Flash Drive

********************************************************************************
To report errors or request improvements on this procedure,
please Add a Comment on Doc ID: 1530449.1
********************************************************************************

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS ARE REQUIRED?: No special skills required, Customer Replaceable Unit (CRU) procedure

TIME ESTIMATE: 30 minutes

TASK COMPLEXITY: 0

REMOVAL/REPLACEMENT INSTRUCTIONS:

PROBLEM OVERVIEW: failed USB flash drive

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

ESD Caution:

Circuit boards and drives contain electronic components that are extremely sensitive to static electricity. Ordinary amounts of static electricity from clothing or the work environment can destroy the components located on these boards. Do not touch the components along their connector edges.
Use a Antistatic Wrist strap. Attach one end of the strap to your wrist and the other end to the chassis, depending on what type of strap you use, with the adhesive end or the metal plug.
Use an Antistatic Mat. Place ESD-sensitive components such as motherboards, memory, and other PCBs on an antistatic mat

DAMAGE ALERT: Perform a visual inspection of the replacement part to make sure that there are no damaged components, connectors, bent pins, damaged packages during shipping, etc. If the part is damaged, don't install it into the system, order a new part. Handle with caution and package carefully the return part to avoid any damages during shipping.

Shut Down the Oracle Solaris OS
Prepare the Server Module for Removal
Remove the Server Module From the Modular System
Remove the Cover
ESD Safety Measures

WHAT ACTIONS ARE REQUIRED:

Remove a USB Flash Drive

1. Locate the USB flash drive at the rear of the server module.
2. Pull the drive out.

Install a USB Flash Drive

1. Locate the USB connector on the motherboard.
2. Plug your USB flash drive into the upper port of the USB connector.
3. Return the server module to operation.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTIONS ARE REQUIRED TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

Boot system and monitor boot sequence for errors. Test functionality of system. Restart software applications per applicable administration guides to resume system operation.

PARTS NOTE:

https://support.oracle.com/handbook_private/Systems/SPARC_T5_1B/components.html

https://support.oracle.com/handbook_private/Systems/Netra_T5_1B/components.html

REFERENCE INFORMATION:

SPARC T5-1B Server Module Service Manual at http://docs.oracle.com/cd/E35199_01/index.html

Netra T5-1B Service Module Service Manual at http://docs.oracle.com/cd/E35777_01/index.html

Netra T5-1B Service Module Installation Guide at http://docs.oracle.com/cd/E35777_01/index.html

Attachments

This solution has no attachment