Fujitsu M10-4S - How to replace a XSCF Connection Cable from a BB to a Crossbar box

Asset ID:	1-71-1530041.1
Update Date:	2016-08-01
Keywords:

Solution Type Technical Instruction Sure

Solution 1530041.1 : Fujitsu M10-4S - How to replace a XSCF Connection Cable from a BB to a Crossbar box

Applies to:

Fujitsu M10-4S - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.

Goal

CAP PROBLEM OVERVIEW: How to replace a XSCF Connection Cable from a BB to a Crossbar box
********************************************************************************
To report errors or request improvements on this procedure,
please go to http://support.us.oracle.com and put a comment on Doc ID: 1530041.1
********************************************************************************

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)

Field training in M10-4S servers

TASK COMPLEXITY: 2

Time Estimate: 30 minutes

FIELD ENGINEER INSTRUCTIONS

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY?:

While all types of maintenance are available for the XSCF Connection Cable from a BB to a Crossbar box, the easiest is Active/hot maintenance.
For the other maintenance types see the M10 Service Manual

1. If the target Crossbar box is the master XSCF then switch the Master role to Standby.

XSCF> switchscf -t Standby

2. Execute the XSCF> replacefru command to isolate the target BB from the Cross Bar unit

3. On the Crossbar box remove the faulted XSCF connection cable by pushing the lock release buttons on the both sides of the cable and disconnecting the cable.

4. Trace the cable to the BB and disconnect the cable from the BB

5. Install the replacement cable.

6. Execute the XSCF> replacefru command to restore the BB to service

7. Execute the switchscf -t Active command to switch the standby XSCF to the master XSCF.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

Verify the status of all domains.

PARTS NOTE:

REFERENCE INFORMATION:

Service Manual - http://docs.oracle.com/cd/E38160_01

Attachments

This solution has no attachment