Fujitsu M10-4S - How to replace a Power Supply in a Crossbar box

Asset ID:	1-71-1529931.1
Update Date:	2017-03-07
Keywords:

Solution Type Technical Instruction Sure

Solution 1529931.1 : Fujitsu M10-4S - How to replace a Power Supply in a Crossbar box

Applies to:

Fujitsu M10-4S - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.

Goal

CAP PROBLEM OVERVIEW: How to replace a Power Supply in a Crossbar box
********************************************************************************
To report errors or request improvements on this procedure,
please go to http://support.us.oracle.com and put a comment on Doc ID: 1529931.1
********************************************************************************

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)

Field training in M10-4S servers

TASK COMPLEXITY: 2

Time Estimate: 30 minutes

FIELD ENGINEER INSTRUCTIONS

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY?:

Most types of maintenance are available for the Power Supply, but the easiest is Active/hot maintenance. For the other maintenance types see the M10 Service Manual

1. Execute the XSCF> replacefru command to isolate the target Power Supply unit from the Crossbar box

2. Remove the power cords from the Power Supply

3. While raising the the lever of the Power Supply unit, hold the handle and pull out the power supply unit. Power Supplies are numbered starting from the bottom 0 to 3

4. Replace the Power Supply

5. Replace the power cords

6. Execute the XSCF> replacefru command to restore the Power Supply to Service

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

Verify the status of all domains.

PARTS NOTE:

REFERENCE INFORMATION:

Service Manual - http://docs.oracle.com/cd/E38160_01

Attachments

This solution has no attachment