How to Replace a SPARC T5-2 DVD Drive:ATR:1525975.1:0

Asset ID:	1-71-1525975.1
Update Date:	2017-03-29
Keywords:

Solution Type Technical Instruction Sure

Solution 1525975.1 : How to Replace a SPARC T5-2 DVD Drive:ATR:1525975.1:0

Applies to:

SPARC T5-2 - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.

Goal

How to Replace a T5-2 DVD Drive

********************************************************************************
To report errors or request improvements on this procedure,
please Add a comment on Doc ID: 1525975.1
********************************************************************************

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS ARE REQUIRED?: No special skills required, Customer Replaceable Unit (CRU) procedure

Time Estimate: 60 minutes

Task Complexity: 0

REMOVAL/REPLACEMENT INSTRUCTIONS:

PROBLEM OVERVIEW: failed DVD Drive replacing.

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

ESD Caution:

Circuit boards and drives contain electronic components that are extremely sensitive to static electricity. Ordinary amounts of static electricity from clothing or the work environment can destroy the components located on these boards. Do not touch the components along their connector edges.
Use a Antistatic Wrist strap. Attach one end of the strap to your wrist and the other end to the chassis, depending on what type of strap you use, with the adhesive end or the metal plug.
Use an Antistatic Mat. Place ESD-sensitive components such as motherboards, memory, and other PCBs on an antistatic mat

DAMAGE ALERT: Perform a visual inspection of the replacement part to make sure that there are no damaged components, connectors, bent pins, damaged packages during shipping, etc. If the part is damaged, don't install it into the system, order a new part. Handle with caution and package carefully the return part to avoid any damages during shipping.

The customer should conduct an orderly software system shutdown. Then power down system and disconnect the power cords. A data backup is not a pre-requisite but is a wise precaution

WHAT ACTIONS ARE REQUIRED:

Prepare for servicing:

     a. Attach an antistatic wrist strap.
     b. Remove any media from the drive.
     c. Power off the server and unplug power cords from the power supplies.

Removing DVD drive

     1. (Netra only) Remove the 2 hard drives below the DVD.
     2. Push down on the latch on the top left corner of the DVD drive or filler panel. (On Netra pull the green tab under the right of the DVD)
     3. Slide the DVD drive or filler panel out of the server.

CAUTION: Whenever you remove the DVD drive or filler panel, you should replace it with another DVD drive or a filler panel; otherwise the server might overheat due to improper airflow.

Installing DVD drive

     1. Unpack the DVD drive or filler panel (If it is a DVD drive, attach an antistatic wrist wrap and place the drive on an antistatic mat).
     2. Slide the DVD drive or filler panel into the front of the chassis until it seats.
     3. (Netra only) Insert the 2 hard drives below the DVD.
     4. Return the server to operation:
         a. Return the server to the normal rack position.
         b. Reinstall the power cords to the power supplies and power on the server.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTIONS ARE REQUIRED TO RETURN THE SYSTEM TO AN OPERATIONAL STATE?:

Verify functionality, no service LEDs or messages.

PARTS NOTE:

https://support.oracle.com/handbook_private/Systems/SPARC_T5_2/components.html#RemovableMedia

REFERENCE INFORMATION:

SPARC T5-2 Service Manual
http://docs.oracle.com/cd/E28853_01/html/E28854/gentextid-6869.html#scrolltoc

Oracle Integrated Lights Out Manager 3.2 Documentation
http://docs.oracle.com/cd/E37444_01/

Attachments

This solution has no attachment