How to replace a Fan in a Brocade 5300 Fiber Channel Switch

Asset ID:	1-71-1514248.1
Update Date:	2013-05-20
Keywords:

Solution Type Technical Instruction Sure

Solution 1514248.1 : How to replace a Fan in a Brocade 5300 Fiber Channel Switch

Applies to:

Brocade 5300 Switch - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.

Goal

How to replace a Fan in a Brocade 5300 Fiber Channel Switch

Solution

DISPATCH INSTRUCTIONS
   WHAT SKILLS DOES THE FIELD ENGINEER/ADMINISTRATOR NEED?: Field Engineer/Administrator will want to be familiar with Brocade Switches.
   TIME ESTIMATE: 2 minutes
   TASK COMPLEXITY: 0

FIELD ENGINEER/ADMINISTRATOR INSTRUCTIONS:
   PROBLEM OVERVIEW: A fan has failed or is suspected faulty and needs replacement.
   WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY?: Identify the fan assembly that requires replacement by viewing the switch from the non-port side:

• Fan assembly #1 on the right
• Fan assembly #2 in the center
• Fan assembly #3 on the left

WHAT ACTION DOES THE FIELD ENGINEER/ADMINISTRATOR NEED TO TAKE?:

1. Unscrew the captive screw on the fan assembly you are replacing using a Phillips-head screwdriver.
2. Remove the fan assembly you are replacing from the chassis by pulling the handle out, away from the chassis.

NOTE: Wait at least 30 seconds after removal of old fan assembly before installing a new fan assembly. If you do not, the firmware monitoring the fan FRU can get out of sync and cause the status LED to flash between green and amber even though the replacement fan is operating correctly.

Install the new fan assembly in the chassis:

3. Orient the new fan assembly with the captive screw on the right.
4. Gently push the fan assembly into the chassis until it is firmly in.
5. Secure the fan assembly to the chassis by screwing in the captive screw using the Phillips-head screwdriver.

OBTAIN CUSTOMER ACCEPTANCE
WHAT ACTION DOES THE FIELD ENGINEER/ADMINISTRATOR NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE?:

Verify that the fan status LED is lit steady green to indicate normal operation. If the LED is not a steady green, ensure that the fan assembly is securely installed and seated properly.

PARTS NOTE: None

REFERENCE INFORMATION:

Attachments

This solution has no attachment