Sun SPARC(R) Enterprise M3000/M4000/M5000 (OPL) Servers: Power Specifications

Asset ID:	1-71-1503118.1
Update Date:	2017-11-08
Keywords:

Solution Type Technical Instruction Sure

Solution 1503118.1 : Sun SPARC(R) Enterprise M3000/M4000/M5000 (OPL) Servers: Power Specifications

Applies to:

Sun SPARC Enterprise M3000 Server - Version All Versions and later
Sun SPARC Enterprise M5000 Server - Version All Versions and later
Sun SPARC Enterprise M4000 Server - Version All Versions and later
Information in this document applies to any platform.

Goal

What is the maximum power draw of the M3000 and M4000/M5000 servers?

Solution

The power requirements for the M4000/M5000 server are found into the "SPARC Enterprise M4000/M5000 Servers Site Planning Guide" that is available here, at the following section:

2.4 Electrical and Cooling Specifications
- TABLE 2-8 Midrange Servers Electrical Specifications


	M4000 Server	M5000 Server
Number of power cords	2 (1 power cord per power supply unit)	4 (1 power cord per power supply unit)
Redundancy	1 + 1 redundant Second power supply is redundant at 200 VAC	2 + 2 redundant Second and fourth power supplies are redundant at 200 VAC
Input voltage	100-127 VAC 200-240 VAC	100-127 VAC 200-240 VAC
Maximum current	24.0A at 100-127 VAC (12A/cord) 12.0A at 200-240 VAC (12A/cord)	48A at 100-127 VAC (12A/cord) 24A at 200-240 VAC (12A/cord)
Frequency	50-60 Hz	50-60 Hz
Power draw (maximum)	1,692W (2 power cords)	3,270W (4 power cords)
Rush current per PSU ^[5]	50A	50A
Leakage current per PSU ^[6]	1.5mA	1.5mA
Volt ampere	1,763 VA	3,406 VA
Heat	5,774 BTUs/hr (6,091 kJ/hr)	11,160 BTUs/hr (11,772 kJ/hr)
Power factor	0.98	0.98

Note - Note - The values of power consumption represent power requirements of the system under highest achieved stress and utilization. Contact your authorized service engineer for the applicable power requirements.


	Location	Power Cord Type	Connector Type
M4000 Server	Americas, Taiwan, Korea, Japan	NEMA L5-15 125V 15A NEMA L6-20 250V 20A	IEC 60320 C19
M4000 Server	Rest of the world	IEC 60309 16A 250V	3PIN with IEC 60320 C20
M5000 Server	Americas, Taiwan, Korea, Japan	NEMA L5-15 125V 15A NEMA L6-20 250V 20A	IEC 60320 C19
M5000 Server	Rest of the world	IEC 60309 16A 250V	3PIN with IEC 60320 C20

Note - For servers that have the plug with lock function, confirm that a 20A overcurrent protection device is available outside the server. If one is not available, prepare an external 20A overcurrent protection that can be achieved by means of no-fuse breakers (NFBs) or fuses. The plug with lock function refers to plugs other than grounding-type ones with two parallel blades, such as the NEMA L6-30, L6-20, L6-15, and L5-15.

The power requirements for the M3000 server is found into the "SPARC Enterprise M3000 Server Site Planning Guide" that is available here, at the following section:

3.3 Power Requirements
- TABLE 3-4 Electrical Specifications

power reference

To discuss this information further with Oracle experts and industry peers, we encourage you to review, join or start a discussion in an appropriate
My Oracle Support Community - Oracle Sun Technologies Community.

Attachments

This solution has no attachment