Sun Microsystems, Inc.  Oracle System Handbook - ISO 7.0 May 2018 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1497711.1
Update Date:2018-05-23
Keywords:
Solution Type  Technical Instruction Sure

Solution  1497711.1 :   How to Replace a Sun Server X3-2L (Sun Fire X4270 M3) Left LED Indicator Module  

Related Items 
    

  • Big Data Appliance X3-2 Hardware
    •  
  • Big Data Appliance X3-2 Full Rack
    •  
  • SPARC SuperCluster T4-4 Full Rack
    •  
  • Exadata X3-2 Hardware
    •  
  • Oracle SuperCluster T5-8 Full Rack
    •  
  • Big Data Appliance X3-2 In-Rack Expansion
    •  
  • Oracle SuperCluster T5-8 Half Rack
    •  
  • Exadata X3-2 Half Rack
    •  
  • Exadata X3-2 Full Rack
    •  
  • Exadata X3-8 Hardware
    •  
  • SPARC SuperCluster T4-4 Half Rack
    •  
  • Exadata X3-2 Eighth Rack
    •  
  • SPARC SuperCluster T4-4
    •  
  • Big Data Appliance X3-2 Starter Rack
    •  
  • Oracle SuperCluster T5-8 Hardware
    •  
  • Exadata X3-2 Quarter Rack
    •  
  • Sun Server X3-2L
    •  
Related Categories 
    

  • PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: x64-CAP VCAP
    •  






Oracle Confidential PARTNER - Available to partners (SUN).

Reason: FRU CAP   


Applies to:  

Oracle SuperCluster T5-8 Half Rack - Version All Versions and later
Oracle SuperCluster T5-8 Hardware - Version All Versions and later
SPARC SuperCluster T4-4 Full Rack - Version All Versions and later
SPARC SuperCluster T4-4 Half Rack - Version All Versions and later
SPARC SuperCluster T4-4 - Version All Versions and later
x86_64



Goal


How to Replace a Sun Server X3-2L (Sun Fire X4270 M3) Left LED Indicator Module.


Solution


DISPATCH INSTRUCTIONS


WHAT SKILLS DOES THE FIELD ENGINEER/ADMINISTRATOR NEED?:
Sun Server X3-2L (Sun Fire X4270 M3) Training


TIME ESTIMATE: 60 minutes


TASK COMPLEXITY: 1


FIELD ENGINEER/ADMINISTRATOR INSTRUCTIONS:


PROBLEM OVERVIEW: A Sun Server X3-2L (Sun Fire X4270 M3) Left LED Indicator Module needs replacement


WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

If the system is still up and functioning, customer should perform an orderly and graceful shutdown of applications and OS.  Then power off the server and remove the AC power cords from the system.

A data backup is not a prerequisite but is a wise precaution.





Note:


If this server is part of an Exadata or SuperCluster, please follow shutdown instructions in DOC ID: 1188080.1


If this server is part of a Big Data Appliance X3-2, please follow shutdown instruction in DOC ID: 2099858.1




 


WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

1. Prepare the server for service.


    

  1. Power off the server and disconnect the power cords from the power supplies.
    2. 

  2. Extend the server to the maintenance position in the rack.
    3. 

  3. Remove Top Cover
    4. 

  4. Attach an anti-static wrist strap.
    5. 



2. Remove the left indicator module.


    

  1. Remove the two No. 2 Phillips screws that secure the LED indicator module to the server front panel
    2. 

  2. Disconnect the LED indicator module cable from the motherboard, and gently pull the cable through the chassis mid-plane and side wall of the server chassis
    3. 

  3. Remove the LED indicator module from the server front panel and place it on an antistatic mat.
    4. 



3. Install the Replacement left indicator module.


    

  1. Push the LED indicator module cable through the side wall and mid-plane of the server chassis
    2. 

  2. Reconnect the LED indicator module cable to the motherboard.
    3. 

  3. Insert and tighten the two No. 2 Phillips screws to secure the LED indicator module to the server front panel.
    4. 



4. Return the Server to operation


    

  1. Remove any anti-static measures that were used.
    2. 

  2. Re-install the Top Cover
    3. 

  3. Return the server to it's normal operating position within the rack.
    4. 

  4. Re-install the AC power cords and any data cables that were removed.
    5. 

  5. Power on server. Verify that the Power/OK indicator led lights steady on.
    6. 



OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

Boot up system and verify full functionality





Note:


If this server is part of an Exadata or SuperCluster, please follow restart instructions in step 7 of DOC ID: 1188080.1


If this server is part of a Big Data Appliance X3-2, please follow restart instructions in DOC ID: 2099858.1




 


REFERENCE INFORMATION:
Sun Server X3-2L Documentation


http://docs.oracle.com/cd/E23393_01/index.html


Steps to shut down or reboot an Exadata storage cell without affecting ASM (Doc ID 1188080.1)


Steps to Gracefully Shutdown and Power on a Single Node on Oracle Big Data Appliance Prior to Maintenance (Doc ID 2099858.1)



Attachments

This solution has no attachment


















       

Copyright © 2018 Oracle, Inc.  All rights reserved.

 Feedback