Sun Microsystems, Inc.  Oracle System Handbook - ISO 7.0 May 2018 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1488741.1
Update Date:2017-11-30
Keywords:

Solution Type  Technical Instruction Sure

Solution  1488741.1 :   How to Remove and Replace a Sun Ultra 45 Workstation Battery:ATR:1488741.1:0  


Related Items
  • Sun Ultra 45 Workstation
  •  
Related Categories
  • PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
  •  




In this Document
Goal
Solution
 Removing the Battery
 Installing the Battery


Applies to:

Sun Ultra 45 Workstation - Version Not Applicable to Not Applicable [Release N/A]
Information in this document applies to any platform.

Goal

 Sun Ultra 45 Workstation - How to Remove and Replace a Sun Ultra 25 Workstation Battery

Solution

 DISPATCH INSTRUCTIONS
   WHAT SKILLS ARE REQUIRED

No special skills required, Customer Replaceable Unit (CRU) procedure

   TIME ESTIMATE: 45 mins

   TASK COMPLEXITY: 0

REMOVAL/REPLACEMENT INSTRUCTIONS:
   PROBLEM OVERVIEW: Faulty Battery

   WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY?:

A data backup is not a pre-requisite but is a wise precaution.
The customer should conduct an orderly software system shutdown.

   WHAT ACTIONS ARE REQUIRED:

Battery

The battery powers the server’s clock.

Note - The Workstation does not function without the battery.

TABLE 3-2 lists the battery specifications.

 TABLE 3-2 Battery Specifications

Specification

Value

Voltage

3 VDC

Type

CR 2032

Removing the Battery

The battery is located on the System Board.

1. Power off the system and attach an antistatic wrist strap. Open and position the chassis, and remove the access panel.

2. Release the battery by pressing the battery clip away from the battery until the battery shifts out of the battery socket

3. Remove the battery.

Note - The Workstation does not function without the battery.
 

Installing the Battery

The battery fits directly into a socket on the motherboard. There are no additional fasteners or cables.

1. Position the battery over the battery socket with the plus (+) side up

2. Press the battery down into the socket until the battery clicks into place.

3. Reassemble the workstation, power on the system, and verify the battery installation.


OBTAIN CUSTOMER ACCEPTANCE
   WHAT ACTIONS ARE REQUIRED TO RETURN THE SYSTEM TO AN OPERATIONAL STATE?:

Restart software applications per applicable administration guides to resume system operation.

PARTS NOTE:

https://support.oracle.com/handbook_private/Systems/Ultra45/components.html


REFERENCE INFORMATION:

Please refer to the Sun Ultra 45 Workstation Service and Diagnostics Manual: http://docs.oracle.com/cd/E19127-01/ultra25.ws/819-1892-12/819-1892-12.pdf


Attachments
This solution has no attachment
  Copyright © 2018 Oracle, Inc.  All rights reserved.
 Feedback