Sun Microsystems, Inc.  Oracle System Handbook - ISO 7.0 May 2018 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1487605.1
Update Date:2017-11-30
Keywords:

Solution Type  Technical Instruction Sure

Solution  1487605.1 :   How to Remove and Replace Sun Blade 1500/2500 Battery:ATR:1487605.1:0  


Related Items
  • Sun Blade 1500 Workstation
  •  
  • Sun Blade 2500 Workstation
  •  
  • Sun Blade 2500 Silver (1.6 Ghz) Workstation
  •  
Related Categories
  • PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
  •  




In this Document
Goal
Solution


Applies to:

Sun Blade 2500 Silver (1.6 Ghz) Workstation - Version Not Applicable to Not Applicable [Release N/A]
Sun Blade 2500 Workstation - Version Not Applicable to Not Applicable [Release N/A]
Sun Blade 1500 Workstation - Version Not Applicable to Not Applicable [Release N/A]
Information in this document applies to any platform.

Goal

 This document provides the procedure on how to Remove and Replace the battery on Sun Blade 1500/Sun Blade 2500

Solution

 

DISPATCH INSTRUCTIONS

WHAT SKILLS ARE REQUIRED:
No special skills required, Customer Replaceable Unit (CRU) procedure

TASK COMPLEXITY: 0

TIME ESTIMATE: 45 minutes

REMOVAL/REPLACEMENT INSTRUCTIONS

PROBLEM OVERVIEW: Battery failure

OBTAIN CUSTOMER ACCEPTANCE

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

A data backup is not a pre-requisite but is a wise precaution.
The customer should conduct an orderly software system shutdown.

 WHAT ACTIONS ARE REQUIRED:

Removing the Battery

1.Power off the system, then open and position the chassis.

2.Locate the battery.

3.Release the battery by squeezing the battery latch together until the battery shifts out of the motherboard socket.

4.Remove the battery.

The workstation does not function without the battery.

 

Installing the Battery

The battery installs directly onto the motherboard. There are no additional fasteners or cables.

1.Open and position the chassis.

2.Identify the battery installation site.

3.Tilt the battery into the battery connector, angling the battery under the latch.

4.Slide the battery until it clicks into place.

5.Ensure that the battery latch secures the battery in its connector.

6.Reposition the chassis, install the access panel, power on the system, and verify the component installation.

 

WHAT ACTIONS ARE REQUIRED TO RETURN the SYSTEM TO AN OPERATIONAL STATE:

Restart software applications per applicable administration guides to resume system operation.



PARTS NOTE: Include Battery location:

https://support.oracle.com/handbook_private/Systems/SunBlade2500/components.html#Batteries

https://support.oracle.com/handbook_private/Systems/SunBlade2500S/components.html#Batteries

https://support.oracle.com/handbook_private/Systems/SunBlade1500S/components.html#Batteries

https://support.oracle.com/handbook_private/Systems/SunBlade1500/components.html#Batteries

 

ADDITIONAL COMMENTS:

Please refer to the:

Sun Blade 2500 Service, Diagnostics, and Troubleshooting Manual (Silver): http://docs.oracle.com/cd/E19127-01/blade2500.ws/817-5117-11/817-5117-11.pdf

Sun Blade 2500 Service, Diagnostics, and Troubleshooting Manual (Red): http://docs.oracle.com/cd/E19127-01/blade2500.ws/816-0996-11/816-0996-11.pdf

Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual (Silver): http://docs.oracle.com/cd/E19127-01/blade1500.ws/817-5127-11/817-5127-11.pdf

Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual (Red): http://docs.oracle.com/cd/E19127-01/blade1500.ws/816-7564-11/816-7564-11.pdf


Attachments
This solution has no attachment
  Copyright © 2018 Oracle, Inc.  All rights reserved.
 Feedback