Sun Microsystems, Inc.  Oracle System Handbook - ISO 7.0 May 2018 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1467644.1
Update Date:2016-10-03
Keywords:
Solution Type  Technical Instruction Sure

Solution  1467644.1 :   How to Replace a Sun Netra Computing Blade (CP3010/3060/3260/T3-1BA) in Netra CT900 chassis:ATR:1467644.1:0  

Related Items 
    

  • Sun Netra CP3270 ATCA Blade Server
    •  
  • Netra T3-1BA
    •  
  • Sun Netra CP3250 ATCA Blade Server
    •  
  • Sun Netra CT900 Server
    •  
  • Sun Netra CP3260 ATCA Blade Server
    •  
  • Sun Netra CP3020 ATCA Blade Server
    •  
  • Sun Netra CP3220 ATCA Blade Server
    •  
  • Sun Netra CP3010 Blade Server
    •  
  • Sun Netra CP3060 ATCA Blade Server
    •  
Related Categories 
    

  • PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
    •  






In this Document


Goal


Solution




Applies to:  

Sun Netra CP3010 Blade Server - Version Not Applicable and later
Sun Netra CT900 Server - Version Not Applicable and later
Sun Netra CP3060 ATCA Blade Server - Version Not Applicable and later
Sun Netra CP3260 ATCA Blade Server - Version Not Applicable and later
Sun Netra CP3020 ATCA Blade Server - Version Not Applicable and later
Information in this document applies to any platform.



Goal


How to replace a CP3xx0 Board
 
 *********************************************************************
 To report errors or request improvements on this procedure,
 please Add a Comment on Doc ID: 1467644.1
 ********************************************************************* 


Solution


 DISPATCH INSTRUCTIONS
 
 WHAT SKILLS ARE REQUIRED?: No special skills required, Customer Replaceable Unit (CRU) procedure 
 
 Time Estimate: 230 minutes


Task Complexity: 0


REMOVAL/REPLACEMENT INSTRUCTIONS:


PROBLEM OVERVIEW: Blade related failure
 
 WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :


The customer should conduct an orderly software system shutdown using "[clia] deactivate" command from ShMM.  The blud LED (How-Swap) should be light up and solid.


WHAT ACTIONS ARE REQUIRED?:
 
 0) Preparation --- performed by customer
 
 1. Obtain correct value of "boot-device" OBP parameter or any needed ones
 2. Able to upgrade/downgrade SysFW to a desired level
 
 1) Remove Blade
 
 0.  Verify that you have taken the necessary antistatic precautions
 1.  Disconnect all cables connecting to front panel if any
 1a. Label and make sure cable could be restored properly
 2.  Unscrew top and buttom locking screws
 3.  Slid UP buttom latch and pull it out slightly
 3a. Make sure blue LED (Hot-Swap) is light up and solid before proceed to next step
 4.  Slighly open up top latch
 5.  Hold onto both top and bottom latches and open them fully
 5a. Blade should be disengaged with backplane and slided out about approx. one inch
 6.  Pull out entire blade
 
 2) Staging Blade
 
 0.  Verify that you have taken the necessary antistatic precautions
 1.  Move AMC card from pulled-out blade to new one if any
 2.  Move CF card from pulled-out blade to new one if any
 3.  Move DIMMs from pulled-out blade to new one
 
 3) Install Blade
 
 0.  Verify that you have taken necessary antistatic precautions
 1.  Opening injector/ejector latches
 2.  Carefully align edges of blade with card guides in appropriate slot
 3.  Taking care to keep blade aligned in guides, slide blade in until injector/ejector latches engage card cage
 4.  Push blade slightly into midplane connectors, and then close latches to seat blade in connectors
 5.  Tighten the locking screws to ensure blade is secured into shelf
 6.  Connect the cables back to the front panel
 
 
 OBTAIN CUSTOMER ACCEPTANCE



 WHAT ACTIONS ARE REQUIRED TO RETURN THE SYSTEM TO AN OPERATIONAL STATE?: 
 1.  Upgrade/Downgrade SysFW to desired level
 2.  Set "boot-device" or other OBP parameters to correct value
 3.  Follow steps in "Users Guide" of the CP3x0 blade to boot up the blade


 


PARTS NOTE:


Netra CP3010: https://support.oracle.com/handbook_private/Systems/Netra_CP_3010/Netra_CP_3010.html
 Netra CP3060: https://support.oracle.com/handbook_private/Systems/Netra_CP_3060/Netra_CP_3060.html
 Netra CP3260: https://support.oracle.com/handbook_private/Systems/Netra_CP_3260/Netra_CP_3260.html
 Netra T3-1BA: https://support.oracle.com/handbook_private/Systems/Netra_T3_1BA/Netra_T3_1BA.html
 
 Netra CP3020: https://support.oracle.com/handbook_private/Systems/Netra_CP_3020/Netra_CP_3020.html
 Netra CP3220: https://support.oracle.com/handbook_private/Systems/Netra_CP_3220/Netra_CP_3220.html
 Netra CP3250: https://support.oracle.com/handbook_private/Systems/Netra_CP_3250/Netra_CP_3250.html
 Netra CP3270: https://support.oracle.com/handbook_private/Systems/Netra_CP_3270/Netra_CP_3270.html


REFERENCE INFORMATION:


Netra CT900 Server Installation Guide: http://docs.oracle.com/cd/E19217-01/819-1175-14/819-1175-14.pdf
 Netra CT900 Server Service Manual: http://docs.oracle.com/cd/E19217-01/819-1176-11/819-1176-11.pdf
 Netra CP3010 Server Service Manual: http://docs.oracle.com/cd/E19490-01/819-1183-10/819-1183-10.pdf
 Netra CP3060 Server Service Manual: http://docs.oracle.com/cd/E19765-01/819-4967-11/819-4967-11.pdf
 Netra CP3260 Server Service Manual: http://docs.oracle.com/cd/E19536-01/820-0457-11/820-0457-11.pdf
 Netra T3-1BA Server Service Manual: http://docs.oracle.com/cd/E20658_01/pdf/E20659-01.pdf
 
 Netra CP3020 User's Guide: http://docs.oracle.com/cd/E19804-01/index.html
 Netra CP3220 User's Guide: http://docs.oracle.com/cd/E19619-01/index.html
 Netra CP3250 User's Guide: http://docs.oracle.com/cd/E19233-01/index.html
 Netra CP3270 User's Guide: http://docs.oracle.com/cd/E19858-01/index.html



Attachments

This solution has no attachment


















       

Copyright © 2018 Oracle, Inc.  All rights reserved.

 Feedback