How to Remove and Replace a Netra SPARC T3-1 & T4-1 Fan Board:ATR:1458853.1:0

Asset ID:	1-71-1458853.1
Update Date:	2016-04-20
Keywords:

Solution Type Technical Instruction Sure

Solution 1458853.1 : How to Remove and Replace a Netra SPARC T3-1 & T4-1 Fan Board:ATR:1458853.1:0

Applies to:

Netra T3-1 - Version All Versions and later
Netra SPARC T4-1 Server - Version All Versions and later
Information in this document applies to any platform.

Goal

Service a Netra SPARC T3-1 or T4-1 Fan Board

********************************************************************************
To report errors or request improvements on this procedure, please put a comment on Doc ID: 1458853.1
********************************************************************************

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS ARE REQUIRED?: No special skills required, Customer Replaceable Unit (CRU) procedure

Time Estimate: 30 minutes

Task Complexity: 0

REMOVAL/REPLACEMENT INSTRUCTIONS

PROBLEM OVERVIEW: Fan Board failure (fan board is part of the DVD tray assembly)

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

DAMAGE ALERT: Perform a visual inspection of the replacement part to make sure that there are no damaged components, connectors, bent pins, damaged packages during shipping, etc. If the part is damaged, don't install it into the system, order a new part. Handle with caution and package carefully the return part to avoid any damages during shipping.

Shut down system and Power down the server.

WHAT ACTIONS ARE REQUIRED:

Remove the Fan Board

1. Remove the Top cover

2. Remove the DVD tray.

3. Flip the DVD tray over and remove the five screews that secure the air baffle to the DVD tray, and remove the air baffle.

4. Remove the six screws that secure the fan board to the DVD tray, and gently lift the board from the bracket. Use care when separating the interface connector.

5. Lift the fan board away from the DVD tray and set the fan board aside.

Install the Fan Board

1. Align the fan board to the location where it installs onto the DVD tray. The power and signal connectors fit into the cut-outs of the DVD tray.

2. Secure the fan board to the DVD tray with the six screws. Make sure that the interface connector connects properly

3. Secure the air baffle to the DVD tray with the five screws.

4. Install the DVD tray.

5. Install the front cover.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTIONS ARE REQUIRED TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

Boot system and monitor boot sequence for errors. Test functionality of system. Restart software applications per applicable administration guides to resume system operation.

PARTS NOTE: 542-0391 [C] DVD Tray Assembly (same part on Netra T3 & T4)

https://support.oracle.com/handbook_private/Systems/Netra_T3_1/components.html#I/O

https://support.oracle.com/handbook_private/Systems/Netra_T4_1/components.html#I/O

REFERENCE INFORMATION: Netra SPARC T3-1 Service Manual, p/n E20689 or Netra SPARC T4-1 Service Manual, p/n E23206-xx

Attachments

This solution has no attachment