Sun StorageTek L180 Tape Library
 
Sun StorageTek L1400 Tape Library
 
Sun StorageTek L700 Tape Library
 

PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: STK Legacy Drive and Library
 
_Old GCS Categories>Sun Microsystems>Storage - Tape>Libraries - L-Series
 

In this Document

Goal

Solution

References

Oracle Confidential PARTNER - Available to partners (SUN).
Reason: Doc for FEs & Partner FEs

Applies to:

Goal

How to capture CLI logs from L180/L700/L1400 Tape Libraries.

Solution

MPC/MPCL card on L180/L700/L1400 has multiple RJ45 serial ports.
To Capture logs from CLI, FE should attach RJ45-DB9 serial adapter to top most serial port marked as CSE.

Use a network cable to interconnect DB9 adapter & Serial Port [COM] on FE Laptop.
Refer :
Serial Adapter P/N : 10410823 [CONN,TRANS,9,D-SUB-TO-RJ45]  

Hyperterm Settings & Cable Pinout : Lxxx - Pinout for Cable to Connect to the CSE Port (Doc ID 1014033.1)

Once connected with Hyperterm, 'CLI>' prompt comes up.

From CLI>, Capture below command output & Save it to a text file.

cli> date print
cli> version
cli> libstate
cli> config view
cli> wwn view
cli> fsc print
cli> drive all
cli> stat all
cli> cartridge

Once the information has been acquired, attach to the Service Request for review as needed.

List of additional commands which are available from CLI :

*****
cli> help all
help [command]         help on a specific command
diag                            execute diagnostics
download                   download a new image to prom
fsc                              manipulate fault symptom codes
network                     manipulate network information
snmp                          manipulate SNMP configuration
time                           view/modify library date & time
password                   reset/change library admin password
wwn                           manipulate WWN configuration
audit                          manipulate audit database
burnin                        execute burnin test
calib                           manipulate calibration database
cartridge                    show data for all cartridges
config                         view library configuration
drive                           show drive information
ftune                           show fine tune data
init                              execute initialization
label-option                manipulate cartridge label format reporting
libstate                       show library state
metrics                       show metrics
move                          execute move
ptp [arg.]                    move ptp/show ptp info, status
range                          show range of motion
reboot                        execute reboot
stat                             show statistics
version                        show version information
vision                          show vision information
*****

This solution has no attachment