How to Replace the SPARC T4-1 DVD-USB Assembly:ATR:1411508.1:0

Asset ID:	1-71-1411508.1
Update Date:	2016-08-15
Keywords:

Solution Type Technical Instruction Sure

Solution 1411508.1 : How to Replace the SPARC T4-1 DVD-USB Assembly:ATR:1411508.1:0

Applies to:

SPARC T4-1 - Version Not Applicable and later
Information in this document applies to any platform.

Goal

Servicing SPARC T4-1 DVD/USB Assembly

******************************************************************************
To report errors or request improvements on this procedure,
please go to http://support.us.oracle.com and put a comment on Doc ID: 1411508.1
******************************************************************************

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS ARE REQUIRED?: No special skills required, Customer Replaceable Unit (CRU) procedure

TIME ESTIMATE: 120 minutes

TASK COMPLEXITY: 0

REMOVAL/REPLACEMENT INSTRUCTIONS:

PROBLEM OVERVIEW: failed DVD/USB Assembly

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

DAMAGE ALERT: Perform a visual inspection of the replacement part to make sure that there are no damaged components, connectors, bent pins, damaged packages during shipping, etc. If the part is damaged, don't install it into the system, order a new part. Handle with caution and package carefully the return part to avoid any damages during shipping.

The customer should conduct an orderly software system shutdown (shut the operating system down gracefully, using "init 5"). Then power down system (poweroff) and remove power cords. A data backup is not a pre-requisite but is a wise precaution.

WHAT ACTIONS ARE REQUIRED?:

Note - This is a cold service procedure that can be performed by customers.

       * Perform the preliminary steps required for cold service procedures.

1. Removing DVD / USB Assembly

a. Remove any optical disks from DVD module and unplug any USB cables from USB port

b. Bring server to standby mode.
   - Momentarily press recessed Power button on server front panel. You may need to use a pointed object, such as a stylus or pen

c. Unplug the power cords

d. Attach antistatic wrist strap

e. If the lower right hard drive bay contains an HDD or SDD module, remove it.
   - This is the disk bay at location HDD7.

f. Reach in under the DVD/USB module and pull the release tab out.
   - Use finger indentation in hard drive bay below DVD/USB module to extend release tab.

g. Slide DVD/USB module out of hard drive cage

h. Place module on antistatic mat

2. Installing DVD / USB Assembly

a. Slide the DVD/USB module into the front of the chassis until it seats.

b. Slide the release tab back into the system.

c. If you removed a hard drive from the lower right drive bay, reinstall it.

d. Power on the system.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTIONS ARE REQUIRED TO RETURN THE SYSTEM TO AN OPERATIONAL STATE?:
Poweron the system and verify functionality. Restart software applications per applicable administration guides to resume system operation.

PARTS NOTE:

https://support.oracle.com/handbook_private/Systems/SPARC_T4_1/components.html#RemovableMedia

REFERENCE INFORMATION:

http://docs.oracle.com/cd/E22985_01/index.html

Attachments

This solution has no attachment