| Asset ID: |
1-71-1401086.1 |
| Update Date: | 2017-08-16 |
| Keywords: | |
Solution Type
Technical Instruction Sure
Solution
1401086.1
:
SL500 - Configuring Reserved Slots When Partitioning Is Active
| Related Items |
- Sun StorageTek SL500 Modular Library System
|
| Related Categories |
- PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL500 Library
|
In this Document
Oracle Confidential PARTNER - Available to partners (SUN).
Reason: Confidential for Oracle Support personnel
Applies to:
Sun StorageTek SL500 Modular Library System - Version Not Applicable and later
Information in this document applies to any platform.
Goal
Configuring Reserved Slots When Partitioning Is Active.
Can not configure any reserved slots or make reserved slot configuration changes needed for Diagnostic and Cleaning tapes while partitions are active.
Solution
To successfully configure or change reserved slots, you cannot have any library partitions active.
To configure/change reserved slots, you will have to delete any and all partitioned slots, CAP's, and drives so that the partition / partitions will not have reserves on any of the slots in the library. Once this is done you can configure or change the reserved slots using CLI in the library and then reboot the library. When the library is back up and ready, you can then go and reconfigure the partition / partitions.
Note:
You may have to reconfigure your backup application due to SCSI Element ID's changing as a result of the changing of the reserved slots.
Provided by Ryan Lucas.
Attachments
This solution has no attachment
