Steps to setting up the Exalogic Cluster Configuration on the Storage Nodes for ASR (Auto Service Request) Activation

Asset ID:	1-71-1393882.1
Update Date:	2016-06-03
Keywords:

Solution Type Technical Instruction Sure

Solution 1393882.1 : Steps to setting up the Exalogic Cluster Configuration on the Storage Nodes for ASR (Auto Service Request) Activation

Related Items


Oracle Exalogic Elastic Cloud X2-2 One-Eighth Rack
 Sun Migrated SR Product
 Oracle Exalogic Elastic Cloud X2-2 Qtr Rack
 Oracle Exalogic Elastic Cloud X2-2 Half Rack
 Oracle Exalogic Elastic Cloud X2-2 Full Rack
 Oracle Exalogic Elastic Cloud X2-2 Hardware

Related Categories


PLA-Support>Sun Systems>Sun_Other>RapidSR>SN-OTH: RapidSR-ASR
 _Old GCS Categories>Sun Microsystems>Auto Service Request

In this Document

Goal

To have the Storage nodes to call home with ASR, the configuration needs to be setup within the cluster to have the management networks to be locked to that assigned node

Fix

Configuration of the Storage node 1 to set the management interface igb0

Configuration of the Storage Node 2 to set the management interface igb1

Applies to:

Sun Migrated SR Product - Version Not Applicable to Not Applicable [Release N/A]
Oracle Exalogic Elastic Cloud X2-2 Full Rack - Version All Versions to All Versions [Release All Releases]
Oracle Exalogic Elastic Cloud X2-2 Half Rack - Version All Versions to All Versions [Release All Releases]
Oracle Exalogic Elastic Cloud X2-2 Hardware - Version All Versions to All Versions [Release All Releases]
Oracle Exalogic Elastic Cloud X2-2 One-Eighth Rack - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.

Goal

To have the Storage nodes to call home with ASR, the configuration needs to be setup within the cluster to have the management networks to be locked to that assigned node

Note: If this is a new install and the Storage nodes are not in production yet, than a scheduled maintenance window is not needed. If the Storage nodes are in production, a scheduled maintenance window is recommended, as these steps to setup the cluster configuration does require a failover to the second node once the primary node configuration is completed

Fix

Configuration of the Storage node 1 to set the management interface igb0

Step 1: Log into the Storage Node 1 BUI through your preferred browser https://<Storage igb0 IP>:215
Step 2: Navigate to the Cluster configuration page

2a: You can get to this page by clicking on “Configuration”
2b: Under the Configuration page, then click on “Cluster”

Step 3: Locate the management interface igb0 on the screen
Step 4: At the end of the interface, click the lock Icon to lock the interface to Storage Node 1

Step 5: Click the “Apply” Button to save changes
Step 6: From the same page, click on the “FailBack” button to transfer the active node to Storage Node 2

Configuration of the Storage Node 2 to set the management interface igb1

Step 1: Log into Storage Node 2 BUI through preferred browser as you did with Storage Node 1 https://<Storage igb1 IP>:215
Step 2: Navigate to the Cluster configuration page.

2a: You can get to this page by clicking on “Configuration”
2b: Under the Configuration page, then click on “Cluster”

Step 3: Locate the management interface igb1 on the screen
Step 4: At the end of the interface, click the lock Icon to lock the interface to Storage Node 2

Step 5: Click the “Apply” Button to save changes
Step 6: From the same page, click on the “FailBack” button to transfer the active node back to Storage Node 1

Attachments

This solution has no attachment