Sun StorageTek SL500 Modular Library System
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: TAPE-CAP VCAP
 
Microlearning>Video>ML-VID-VCAP
 

In this Document

Goal

Solution

Applies to:

Goal

A CRU Replacement video procedure on the AC/DC 490W Power Supply in SL500 Library.

Solution

DISPATCH INSTRUCTIONS
- WHAT SKILLS ARE NEEDED:
Familiar with the SL500 library.

- TIME ESTIMATE: 30 minutes

- TASK COMPLEXITY: 0

INSTRUCTIONS:
- PROBLEM OVERVIEW:
Power supply is defective and requires replacement.

- WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY?:
All work on the library and drives have stopped.

- WHAT ACTION DO YOU NEED TO TAKE:

Library power supplies are located at the rear of the library and are installed along the left side of the base and drive expansion modules.  A maximum of two power supplies can be installed in each of these modules.

Note: Refer to the attached video for additional replacement assistance.

Warning:
Electrical safety: You will be coming into contact with electrically charged equipment.  Physical harm may occur.

Removal of the power supply:
1. Be sure all jobs the robot is performing have ended.

Note:
If the faulty power supply is redundant, the main power switch does not have to be powered off during this procedure.  The Redundant power supply is located at the bottom of each module whether it is the Base or Drive Expansion Module.

At the rear of the library:
2. Toggle the library main power switch off.  (See note above.)

Note:
The power supply procedure is the same whether in a base or expansion module.

3. Unplug the power supply cord.
4. Remove the four T15 screws attaching the power supply bracket to the power supply and chassis frame.
5. Grasp the handle and slide the power supply out of the chassis frame.

Replacement of power supply:
1. Slide the new power supply into the chassis frame.
2. Align and attach the power supply bracket with four T15 screws.
3. Plug the power cord into the power supply.
4. If the main power switch was turned off, toggle the switch on.

Note:
Powering on the library automatically starts the initialization process. This includes an audit of the library that is performed by the robot.

Note: If you received P/N 314345703 and 7068408 then you don't need to ship the part back but if you received P/N 7046237 then you will need to return the part.

Should you have any issues or questions, please contact the Oracle Technical Support Center for assistance.

WHAT ACTION DO YOU NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:
Library and drive should be put online to the Operating System

PARTS NOTE:
StorageTek SL500, RoHS:YL Modular Library System - Full Components List
https://support.us.oracle.com/handbook_internal/Systems/SL500/SL500_components.html

REFERENCE INFORMATION:
SL500 Replaceable Parts Catalog
http://download-adc.oracle.com/archive/cd_ns/E21115_01/RPC96120f/RPC96120f.pdf

This solution has no attachment