| Asset ID: |
1-71-1361969.1 |
| Update Date: | 2017-09-25 |
| Keywords: | |
Solution Type
Technical Instruction Sure
Solution
1361969.1
:
SL3000 - Re-Enable ILC and Check ComplexId After FRS-3.0 Code Upgrade
| Related Items |
- Sun StorageTek SL3000 Modular Library System
|
| Related Categories |
- PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL3000-8500 Library
|
In this Document
Oracle Confidential PARTNER - Available to partners (SUN).
Reason: Confidential for Oracle Support personnel
Applies to:
Sun StorageTek SL3000 Modular Library System - Version Not Applicable and later
Information in this document applies to any platform.
Goal
SL3000 - Re-Enable ILC and Check ComplexId After FRS-3.0 Code Upgrade
( Inner Library Communication )
Solution
After upgrading to FRS-3.0 code from older versions you need to check via the CLI that the ILC is still enabled and also check the setting of the complexId.
If you use SDP and/or use Port 1A for service, this is important to check.
Commands to check/set these values:
For COMPLEXID
config complexId print
Prints the current SDP complex ID
config complexId set [1-254]
Sets the complexId to the specific number for SDP (default is "1")
For ILC
config ilc print
prints ilc status
config ilc enable | disable
enable or disable the ilc
Provided by Rich Kent.
Attachments
This solution has no attachment
