Sun Ultra 20 Workstation
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: x64-CAP VCAP
 

In this Document

Goal

Solution

Applies to:

Goal

How to remove and replace a Ultra 20 Workstation System Battery

Solution

DISPATCH INSTRUCTIONS
- WHAT SKILLS DOES THE ENGINEER NEED:
- TIME ESTIMATE: 15 minutes
- TASK COMPLEXITY: 0

FIELD ENGINEER INSTRUCTIONS:
- PROBLEM OVERVIEW: Replacing the System Battery

- WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY?:

A data backup is not a pre-requisite but is a wise precaution.
The customer should conduct an orderly software system shutdown.

Then power down the system and disconnect the Power Cord.

- WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

To remove and install the battery:

Caution - If you remove the system battery, you could erase all system-specific information saved in the CMOS.
1. Turn off the power button on the back panel and all of the peripherals connected to the workstation.
2. Remove the left-side access panel.
3. Gently lay the system on its right side on a stable, nonslip surface.
4. Pinch the battery latch together until the battery pops out of the motherboard socket.
5. Lift the battery to remove it.
6. Insert a new battery with the positive sign (+) facing up.
Tilt the battery into the battery connector, angling the battery under the battery latch. Slide the battery until it clicks into place.
7. Replace the left-side access panel.


OBTAIN CUSTOMER ACCEPTANCE
- WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO
AN OPERATIONAL STATE:

PARTS NOTE:
The battery specifications for the Ultra 20 Workstation are:
Voltage: 3 VDC
Type: CR 2032

REFERENCE INFORMATION:

Replacing the System Battery, Section 4.5.6

Sun Ultra 20 Workstation User Guide
http://download.oracle.com/docs/cd/E19127-01/ultra20.ws/819-2146-13/index.html

This solution has no attachment