Sun Fire X2270 M2 Server
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: x64-CAP VCAP
 

In this Document

Goal

Solution

Applies to:

Goal

How to Replace a Sun Fire X2270 M2 Air Duct.

Solution

DISPATCH INSTRUCTIONS
- WHAT SKILLS DOES THE ENGINEER NEED:
- TIME ESTIMATE: 5 minutes
- TASK COMPLEXITY: 0

FIELD ENGINEER INSTRUCTIONS:
- PROBLEM OVERVIEW: Removing and Installing the Air Duct

- WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY?:

A data backup is not a pre-requisite but is a wise precaution.
The customer should conduct an orderly software system shutdown.

Then power down the system and disconnect the Power Cord.

- WHAT ACTION DOES THE ENGINEER NEED TO TAKE:
Remove
1 Prepare the server for service. See How to Prepare for Service.
2 Pull the air duct up and out of the chassis.

Install
1 Position the air duct in the chassis, aligning the baffle with the indents and opening in the chassis divider.
2 Carefully lower the air duct in place.
3 Prepare the server for operation. See How to Prepare for Operation.


OBTAIN CUSTOMER ACCEPTANCE
- WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO
AN OPERATIONAL STATE:

n/a

PARTS NOTE:

REFERENCE INFORMATION:
Location of Internal Server Components

Sun Fire X2270 M2 Server Service Manual
http://docs.oracle.com/cd/E19902-01/html/821-1345/index.html

or

http://docs.oracle.com/cd/E19902-01/pdf/821-1345.pdf

This solution has no attachment