How to Remove and Replace V240 Power Cord:ATR:745:0

Asset ID:	1-71-1347665.1
Update Date:	2017-11-30
Keywords:

Solution Type Technical Instruction Sure

Solution 1347665.1 : How to Remove and Replace V240 Power Cord:ATR:745:0

Applies to:

Sun Fire V240 Server - Version Not Applicable to Not Applicable [Release N/A]
Information in this document applies to any platform.

Goal

How to Remove and Replace V240 Power Cord

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS ARE REQUIRED
No special skills required, Customer Replaceable Unit (CRU) procedure

TIME ESTIMATE: 15 minutes

TASK COMPLEXITY: 0

REMOVAL/REPLACEMENT INSTRUCTIONS

PROBLEM OVERVIEW:
Power Cord failed.

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

A data backup is not a pre-requisite but is a wise precaution.
The customer is not required to perform a system shutdown.

The Sun Fire V240 server has dual redundant power supplies each with its own power cord. You can swap one power cord while the other one is still running.

WHAT ACTIONS ARE REQUIRED:
Replace the bad power cord.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTIONS ARE REQUIRED TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

If the replacement was a hot swap on a redundant configuration, the system should be operational and need no further work.

If the replacement required a shut down, the server needs to be turned on and returned to service.

PARTS NOTE:
Refer to the System Handbook for the country specific type of power cord.
https://support.oracle.com/handbook_private/Systems/SunFireV240_R/SunFireV240_R.html

https://support.oracle.com/handbook_private/Systems/SunFireV240/components.html

REFERENCE INFORMATION:
Service Manual http://download.oracle.com/docs/cd/E19088-01/v240.srvr/819-4207-10/819-4207-10.pdf
and Administration Guide http://download.oracle.com/docs/cd/E19088-01/v240.srvr/819-4208-10/819-4208-10.pdf

Attachments

This solution has no attachment