How to Replace Sun Fire X2200 M2 HDD and Carrier

Asset ID:	1-71-1345633.1
Update Date:	2018-05-10
Keywords:

Solution Type Technical Instruction Sure

Solution 1345633.1 : How to Replace Sun Fire X2200 M2 HDD and Carrier

Applies to:

Sun Fire X2200 M2 Server - Version Not Applicable to Not Applicable [Release N/A]
Information in this document applies to any platform.

Goal

How to Replace Sun Fire X2200 M2 HDD and Carrier.

Solution

CAP PROBLEM OVERVIEW: How to Remove and Replace a Hard Disk Drive and Carrier.

WHAT SKILLS DOES THE ENGINEER NEED?
ESD Awareness and basic hardware competence

Task Complexity: 0

Time Estimate: 90 minutes

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE
RESOLUTION ACTIVITY?

o If you are not using an integrated-mirroring (IM) configuration, you must power off the server before removing an HDD; it is not necessary to remove the cover. Power off the system.
o If you are using an IM configuration, start with the next step.
o Squeeze the release latch and carefully swing the arm to the left as far as it will go.
o Grasp the carrier bezel with both hands and carefully pull the carrier out of the drive bay.
o Reinsert the HDD and carrier into the server.
o Note - If you are installing a new HDD, rather than replacing an already installed HDD, you will need to remove the empty carrier from the drive cage before installing the new HDD.

To Install the HDD and Carrier

o Squeeze the release latch and carefully swing the arm to the left as far as it will go.
o Grasping the body of the drive in both hands, carefully guide the connector end of the carrier into the drive bay, sliding the carrier into the bay until the arm engages and partially closes itself.
o Push the arm forward and latch it to lock the carrier in place.

7. WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM
TO AN OPERATIONAL STATE?
Power on the server, or re-synchronize any IM volumes.

8. ANY PARTS NOTES?

9. REFERENCE INFORMATION
http://download.oracle.com/docs/cd/E19121-01/sf.x2200m2/819-6597-12/index.html

Detailed SVM instructions can be found at
http://download.oracle.com/docs/cd/E19253-01/816-4520/troubleshoottasks-96/index.html

See Document 1010946.1 for Detailed Veritas Volume Manager instructions.
See Document 1002753.1 for Detailed ZFS instructions

See Document 1559677.1 for Detailed instructions for when a disk is configured under the NVIDIA SATA HW RAID controller and MS Windows is installed.

References

<NOTE:1010946.1> - General Guidance for Diagnosis (Disk Failures/Errors) and Replacing Internal Server Disks and JBOD Disks within Solaris
<NOTE:1559677.1> - How to replace a disk drive of NVIDIA mirrored volume in Windows on Sun Fire X2200 M2
<NOTE:1002753.1> - How to Replace a Drive in Solaris[TM] ZFS

Attachments

This solution has no attachment