Sun Ultra 27 Workstation
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: x64-CAP VCAP
 

In this Document

Goal

Solution

Applies to:

Goal

How to Replace a Sun Ultra 27 Workstation Removable Media

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS ARE REQUIRED?: No special skills required, Customer Replaceable Unit (CRU) procedure
TIME ESTIMATE: 60 minutes
TASK COMPLEXITY: 0


REMOVAL/REPLACEMENT INSTRUCTIONS:

PROBLEM OVERVIEW: Removable Media failure.

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY?

The system should be shut down and unplugged prior to performing this action.

WHAT ACTIONS ARE REQUIRED?:

DVD Drive Removal

1. Remove any media in the DVD drive.
2. Power off and unplug the workstation.
3. Remove the left-side access panel.
4. Disconnect the cables from the back of the DVD drive.
5. Push the drive retaining lever tab up to release the retaining hooks.
6. Slide the DVD drive out from the front of the chassis.
7. Ensure that the DVD retaining lever is in the upward or disengaged position.

DVD Drive Replacement

1. Insert the new DVD drive into the vacant DVD housing from the front of the workstation.
2. Align the locking holes in the side of the DVD drive with the slotted holes in the in the side of the DVD housing.
3. To engage the retaining hooks and lock the DVD, pull firmly downward on the green retaining clip handle.
4. Verify that the drive is secured with the retaining hooks by pulling on the front of the DVD.
5. Connect the SATA, power, and jumper cables to the back of the DVD drive
6. Replace the left side access panel and replace retaining screws.


WHAT ACTIONS ARE REQUIRED TO RETURN THE SYSTEM TO AN OPERATIONAL STATE?: Power on the system by pressing the power button on the front panel (left side under the DVD drive)

REFERENCE INFORMATION:

Sun Ultra 27 Workstation Service Manual
http://download.oracle.com/docs/cd/E19127-01/ultra27.ws/820-6776/index.html

This solution has no attachment