How to Replace a Sun Fire X2250 I/O Board

Asset ID:	1-71-1336462.1
Update Date:	2018-05-10
Keywords:

Solution Type Technical Instruction Sure

Solution 1336462.1 : How to Replace a Sun Fire X2250 I/O Board

Applies to:

Sun Fire X2250 Server - Version Not Applicable to Not Applicable [Release N/A]
Information in this document applies to any platform.

Goal

How to Replace a Sun Fire X2250 I/O Board.

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
ESD Awareness and Hardware Competence

TIME ESTIMATE: 60 minutes

FIELD ENGINEER INSTRUCTIONS

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

The customer should conduct an orderly software and system shutdown.
System power off is required.

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

1. Power off the server, including any attached peripherals, and disconnect the server from the electrical outlet.

2. Remove the screws securing the I/O board to the hard disk drive (HDD) cage.

3. Pull the I/O board back slightly, then upward to disengage the board from the guides on top of the HDD cage.

4. Remove all cables connected to the I/O board.

5. Position the I/O board on top of the HDD cage so the openings on the board line up with the guides on top of the HDD cage.

6. Reconnect the cables.

7. Gently push the I/O board down to engage the guides and push the board forward to secure it.

8. Fasten the screws to secure the I/O board to the mounting bracket.

9. Check the routing of all cables for obstructions, and then reinstall the cover.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

See chapter 4.5.1 ( Sun Fire X2250 Server Service Manual )

REFERENCE:
Sun Fire X2250 Server Service Manual
http://download.oracle.com/docs/cd/E19121-01/sf.x2250/820-4593-12/

Attachments

This solution has no attachment