Sun Netra T5440 Server
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
 

Applies to:

Goal

How to Replace a Sun Netra T5440 Battery

*****************************************************************************************
To report errors or request improvements on this procedure, please add a comment on Doc ID: 1334664.1
*****************************************************************************************

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS ARE REQUIRED?: No special skills required, Customer Replaceable Unit (CRU) procedure

TIME ESTIMATE: 30 minutes
TASK COMPLEXITY: 0

REMOVAL/REPLACEMENT INSTRUCTIONS:

PROBLEM OVERVIEW:Battery failure

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

To prepare the server for installing the battery. Proceed with the following steps:

Powering Off the Server

Disconnecting Cables From the Server

Removing the Server From the Rack

Performing Antistatic Measures

Removing the Top Cover

Removing the PCI Mezzanine Assembly

WHAT ACTIONS ARE REQUIRED?:

Removing the Battery

1. Gently depress the release tab and pull the battery out of the battery housing.

Installing the Battery

1. Remove the replacement battery from its packaging.

2. Carefully press the new battery in the slot.

Returning the Server to Operation

1. Install the top cover.  (Position the top cover on the chassis, and tighten the two green captive screws on the rear of the top cove).

2. Install the server into the rack.

3. Cable the server.

4. Power on the server.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTIONS ARE REQUIRED TO RETURN THE SYSTEM TO AN OPERATIONAL STATE?:

Verify functionality, no service LEDs or messages.

PARTS NOTE:  https://support.oracle.com/handbook_private/Systems/Netra_T5440/components.html#SystemBoard

REFERENCE INFORMATION:

http://download.oracle.com/docs/cd/E19874-01/820-4445-13/z40004091017446.html#bbjggjjc

This solution has no attachment