How to Replace a Sun Fire X4275 SAS RAID HBA BBU

Asset ID:	1-71-1332254.1
Update Date:	2018-05-21
Keywords:

Solution Type Technical Instruction Sure

Solution 1332254.1 : How to Replace a Sun Fire X4275 SAS RAID HBA BBU

Applies to:

Sun Fire X4275 Server - Version Not Applicable and later
Information in this document applies to any platform.

Goal

How to Replace a Sun Fire X4275 SAS RAID HBA BBU.

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE FIELD ENGINEER/ADMINISTRATOR NEED:
No special skills required, Customer Replaceable Unit (CRU) procedure

TIME ESTIMATE: 60 minutes

TASK COMPLEXITY: 0

FIELD ENGINEER/ADMINISTRATOR INSTRUCTIONS:

PROBLEM OVERVIEW: A Sun Fire X4275 SAS RAID HBA BBU needs replacement

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

A data backup is not a pre-requisite but is a wise precaution.
The customer should conduct an orderly software system shutdown.

Then power down the system and disconnect the Power Cord.

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

1. Powering off the system and disconnect the power cords from the system

2. Remove the top cover

3. Removing the PCI riser

4. Remove SAS HBA and place the card on an antistatic mat

5. Replace the battery module on the card with spare battery module

6. Install SAS HBA into the system

7. Install the PCI riser

8. Install the top cover

9. Connect the power cords and power on the system

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

PARTS NOTE:

REFERENCE INFORMATION:

Sun Fire X4170, X4270, and X4275 Servers Service Manual
http://download.oracle.com/docs/cd/E19871-01/820-5830-13/index.html

Attachments

This solution has no attachment