Sun Storage 7000 Unified Storage System: How to set up NAS clustering

Asset ID:	1-71-1329307.1
Update Date:	2016-10-25
Keywords:

Solution Type Technical Instruction Sure

Solution 1329307.1 : Sun Storage 7000 Unified Storage System: How to set up NAS clustering

Related Items


Sun ZFS Storage 7420
 Oracle ZFS Storage ZS3-2
 Oracle ZFS Storage ZS4-4
 Sun Storage 7410 Unified Storage System
 Sun Storage 7310 Unified Storage System
 Oracle ZFS Storage ZS3-4
 Oracle ZFS Storage Appliance Racked System ZS4-4
 Sun ZFS Storage 7320
 Oracle ZFS Storage ZS3-BA

Related Categories


PLA-Support>Sun Systems>DISK>ZFS Storage>SN-DK: 7xxx NAS
 _Old GCS Categories>Sun Microsystems>Storage - Disk>Unified Storage

Unable to configure secondary head into cluster

In this Document

Goal

Solution

References

Created from <SR 3-3807745001>

Applies to:

Oracle ZFS Storage ZS3-4 - Version All Versions and later
Oracle ZFS Storage ZS4-4 - Version All Versions and later
Oracle ZFS Storage Appliance Racked System ZS4-4 - Version All Versions and later
Sun Storage 7310 Unified Storage System - Version All Versions and later
Oracle ZFS Storage ZS3-2 - Version All Versions and later
7000 Appliance OS (Fishworks)

Goal

The purpose of this document is to demonstrate how to configure a secondary head into a cluster.

To discuss this information further with Oracle experts and industry peers, we encourage you to review, join or start a discussion in the My Oracle Support Community - Disk Storage ZFS Storage Appliance Community

Solution

Before you start the configuration, ensure that the cluster card cabling is set up as shown in the Sun ZFS Storage 7000 System Administration Guide.

NOTE: To confirm that the cluster 'links' cabling is correctly configured - See Document ID 2081179.1

It is important that no configuration is carried out on the secondary head before attempting to set up cluster on the primary.

The secondary head will either need to be reset to factory defaults or have not been configured at all. It must boot up to the screen that shows:

Press any key to begin initial configuration ...

CAUTION - Do not press any key and do not allow the configuration to proceed any further on this head.

The full procedure to setup the cluster is detailed at:

http://download.oracle.com/docs/cd/E22471_01/html/820-4167/configuration__cluster.html#configuration__cluster__setup_procedure

If the device names do not match between the heads, use Document 1560329.1 or the procedure therein, to fix the issue.

See also Document ID 2196548.1 How to configure dedicated management interfaces.

Attachments

This solution has no attachment