Sun Blade 6048 System
 
Sun Blade X6275 Server Module
 
Sun Blade 6000 System
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: x64-CAP VCAP
 

In this Document

Goal

Solution

Applies to:

Goal

How to Remove and Replace a Sun Blade X6275 USB Drives

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
X6275 Trained

TIME ESTIMATE: 30 minutes

FIELD ENGINEER INSTRUCTIONS

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

Take ESD Precautions

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

A. Removing the USB Drive

1. If necessary, back up any data that is contained on the USB drives.

2. Prepare the server module for service.

* Power off both server module compute nodes.
* Remove the server module from the Sun Blade chassis. Place it on a flat surface.
* Attach an antistatic wrist strap.

3. Locate the USB port on the back of the motherboard.

4.Grasp the USB drive, and pull the USB drive out.

5. Repeat Step 4 for the second USB Drive.

B. Installing the USB Drive

1. Unpack the replacement USB drives and place them on an antistatic mat.

2.Push the USB drive into the port. The USB drive's gold fingers should face up.

3. Repeat Step 2 for the second USB drive.

4. Return the server module to operation.

* Insert the server module into the Sun Blade chassis.
* Power on the server module.

5. Verify and view component information.

* Use the ILOM web interface or CLI. Refer to the corresponding ILOM documentation collection.

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

Verify functionality, no service LEDs or messages

PARTS NOTE:

REFERENCE INFORMATION:

Sun Blade X6275 Server Module Service Manual

http://download.oracle.com/docs/cd/E19464-01/820-6849-13/index.html

This solution has no attachment