Sun Blade 6048 System
 
Sun Blade X6275 Server Module
 
Sun Blade 6000 System
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: x64-CAP VCAP
 

In this Document

Goal

Solution

Applies to:

Goal

How to Remove and Replace a Sun Blade X6275 System Battery

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
X6275 Trained

TIME ESTIMATE: 30 minutes

FIELD ENGINEER INSTRUCTIONS

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

Take ESD Precautions

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

1. Prepare the server module for service.

* Power off both server module compute nodes.
* Remove the server module from the Sun Blade chassis. Place it on a flat surface.
* Attach an antistatic wrist strap.
* Remove the server module top cover.

2.Remove the battery by gently pulling the clip away from the edge of the battery and lifting the battery straight up.

3. Insert the battery by pressing the battery straight down and gently pushing the clip towards the edge of the battery.

* Install the new battery in the holder with the same orientation (polarity) as the battery that you removed.
* The positive polarity, marked with a “+” symbol, faces outward.

4. Clear the CMOS NVRAM.

* The BIOS settings revert to the default settings.

5. Return the server module to operation.

* Install the server module top cover.
* Insert the server module into the Sun Blade chassis.
* Power on the server module.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

Verify functionality, no service LEDs or messages

PARTS NOTE:

REFERENCE INFORMATION:

Sun Blade X6275 Server Module Service Manual

http://download.oracle.com/docs/cd/E19464-01/820-6849-13/index.html

This solution has no attachment