How to Replace a Sun Fire X4540 Power Supply

Asset ID:	1-71-1318114.1
Update Date:	2018-05-17
Keywords:

Solution Type Technical Instruction Sure

Solution 1318114.1 : How to Replace a Sun Fire X4540 Power Supply

Applies to:

Sun Fire X4540 Server - Version Not Applicable and later
Information in this document applies to any platform.

Goal

How to Replace a Sun Fire X4540 Power Supply.

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE FIELD ENGINEER/ADMINISTRATOR NEED:
No special skills required, Customer Replaceable Unit (CRU) procedure

TIME ESTIMATE: 30 minutes

TASK COMPLEXITY: 0

FIELD ENGINEER/ADMINISTRATOR INSTRUCTIONS:

PROBLEM OVERVIEW: A Sun Fire X4540 Power Supply needs replacement

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

Remove a Power Supply

If present, remove cable management arm, or swivel open cable management arm to view power supplies.
Disconnect the AC power cord that is connected to power supply you want to replace.
Remove installed power supply unit by pulling its handle downward until it disengages unit from connector on PDB. Pull out power supply.

Install a Power Supply

Align power supply with empty bay in chassis.
With power supply handle in down position, push power supply into power supply bay.
Connect AC power cord to new power supply. Use the power cord retaining clips
If present, swivel cable management arm back into closed position.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

PARTS NOTE:

REFERENCE:

Sun Fire X4500/X4540 Server Service Manual

http://download.oracle.com/docs/cd/E19469-01/819-4359-19/index.html

Attachments

This solution has no attachment