| Asset ID: |
1-71-1317586.1 |
| Update Date: | 2018-05-21 |
| Keywords: | |
Solution Type
Technical Instruction Sure
Solution
1317586.1
:
How to Replace a Sun Fire X4440 CPU/Memory Mezzanine Tray
| Related Categories |
- PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: x64-CAP VCAP
|
In this Document
Oracle Confidential PARTNER - Available to partners (SUN).
Reason: FRU CAP
Applies to:
Sun Fire X4440 Server - Version Not Applicable and later
Information in this document applies to any platform.
Goal
How to Replace a Sun Fire X4440 CPU/Memory Mezzanine Tray.
Solution
DISPATCH INSTRUCTIONS
WHAT SKILLS DOES THE FIELD ENGINEER/ADMINISTRATOR NEED?:
Sun Fire X4440 Training
TIME ESTIMATE: 150 minutes
TASK COMPLEXITY: 1
FIELD ENGINEER/ADMINISTRATOR INSTRUCTIONS:
PROBLEM OVERVIEW: A Sun Fire X4440 CPU/Memory Mezzanine Tray needs replacement
WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :
You must remove the mezzanine tray when removing and installing the motherboard.
Caution - Ensure that all power is removed from the server before installing mezzanine tray or damage to system components might occur. You must disconnect all power cables from the system before performing this procedure.
WHAT ACTION DOES THE ENGINEER NEED TO TAKE:
Removing the Mezzanine Tray
1. Prepare the server for service.
a. Power off the server.
b. Disconnect the power cord (or cords) from the power supply (or supplies).
c. Slide the server out of the rack.
d. Attach an antistatic wrist strap.
e. Remove the top cover.
2. Unlock the two mezzanine tray tabs by pressing away from the mezzanine tray
3. Grab the handles and rotate the handles towards the center of the mezzanine tray [2].
4. Lift the mezzanine tray up [3].
5. Set the mezzanine tray aside.
Place the mezzanine tray on an antistatic mat.
Installing the Mezzanine Tray
1. Hold the two handles and carefully place the mezzanine tray into the motherboard.
Ensure that the mezzanine tray is aligned and fully seated. The handles should click into the tabs.
2. Return the server to operation.
a. Install the top cover.
b. Slide the server into the rack.
c. Reconnect the power cord (or cords) to the power supply (or supplies).
Verify that the AC Present LED is lit.
d. Power on the server.
OBTAIN CUSTOMER ACCEPTANCE
WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:
N/A
PARTS NOTE:
N/A
REFERENCE INFORMATION:
Sun Fire X4440 Server Service Manual - See Servicing the Mezzanine Tray, chapter 4.2
http://download.oracle.com/docs/cd/E19121-01/sf.x4440/820-3836-14/index.html
Attachments
This solution has no attachment
