How to remove and replace a Starcat Air Filter:ATR:1535:1

Asset ID:	1-71-1310624.1
Update Date:	2016-01-20
Keywords:

Solution Type Technical Instruction Sure

Solution 1310624.1 : How to remove and replace a Starcat Air Filter:ATR:1535:1

Applies to:

Sun Fire E20K Server - Version Not Applicable and later
Sun Fire 12K Server - Version Not Applicable and later
Sun Fire 15K Server - Version Not Applicable and later
Sun Fire E25K Server - Version Not Applicable and later
Information in this document applies to any platform.

Goal

How to remove and replace a Starcat Air Filter

Fix

CAP PROBLEM OVERVIEW: Air Filter(s) Replacement

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:

Starcat Training

DELIVERY REQUIREMENT:

Immediate

TASK COMPLEXITY: 1

FIELD ENGINEER INSTRUCTIONS

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

N/A

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

1. Route I/O cables away from the filter being replaced, ensuring not to disconnect any cables. Do this on both the front and rear of the chassis.

2. Remove the face plates by loosening the front panel captive thumbscrew from both the front and rear of the three filter chambers on the power chassis.

3. Take two new filters and insert one behind the other in one of the filter chambers, pushing the old filters out through the other side of the chassis.

4. Repeat Step 2, and Step 3 for the two remaining filter chambers.

5. After the six new filters have been replaced, install the faceplates and tighten the captive screws.

6. Restore the I/O cables to their original location.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

N/A

PARTS NOTE:

N/A

REFERENCE INFORMATION:

Service Manual: http://download.oracle.com/docs/cd/E19065-01/servers.e25k/index.html

TIME ESTIMATE: 60 Min

Attachments

This solution has no attachment