Sun Fire V215 Server
 
Sun Fire V245 Server
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
 

In this Document

Goal

Solution

Applies to:

Goal

How to replace a V245 Rack Mount Kit

Solution

*DISPATCH INSTRUCTIONS*

WHAT SKILLS ARE REQUIRED
No special skills required, Customer Replaceable Unit (CRU) procedure

- TIME ESTIMATE: 60 minutes

- TASK COMPLEXITY: 0


*REMOVAL/REPLACEMENT INSTRUCTIONS*

PROBLEM OVERVIEW:
Faulty rack mount kit

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

WHAT ACTIONS ARE REQUIRED:

1. Powering off the system
2. Disconnect all the cables and power cords from the server
3. Extend the server to the maintenance position
4. Press the metal lever that is located on the inner side of the rail to disconnect the cable management
arm(CMA) from the rail assembly
5. From the front of the server, pull the release tabs forward and pull the server forward until it is free of the
rack rails
6. Remove mounting brackets(right side and left side) from the server
7. Attach new mounting bracket(right side and left side) into the server
8. Insert the ends of the the mounting brackets into the slide rails
9. Insert the new PCI card into the slot
10.Slide the chassis into the rack
11.Connect all the cables and power cords from the server
12.Powering on the system

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTIONS ARE REQUIRED TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

PARTS NOTE:

https://support.oracle.com/handbook_private/Systems/SunFireV245/components.html#Rack

https://support.oracle.com/handbook_private/Systems/SunFireV215/components.html#Rack

REFERENCE INFORMATION:

Service Manual.
http://download.oracle.com/docs/cd/E19088-01/

This solution has no attachment