Sun Fire V245 Server
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
 

In this Document

Goal

Solution

Applies to:

Goal

How to replace a V245 DVD Unit

Solution

*DISPATCH INSTRUCTIONS*

WHAT SKILLS ARE REQUIRED:
No special skills required, Customer Replaceable Unit (CRU) procedure

- TIME ESTIMATE: 45 minutes

- TASK COMPLEXITY: 0


*REMOVAL/REPLACEMENT INSTRUCTIONS*

PROBLEM OVERVIEW:
Faulty DVD

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

A data backup is not a pre-requisite but is a wise precaution.
The customer should conduct an orderly software system shutdown.

Then power down the system and disconnect the Power Cord.

WHAT ACTIONS ARE REQUIRED:

1. Powering off the system
2. Remove the rear cover
3. Remove the bezel
4. Remove the front cover
5. Remove the upper cable retainer
6. Disconnect the motherboard/SAS backplane cable
7. Push the spring latch to the right and hold
8. Remove the DVD super-multi drive from the chassis
9. Place the drive on an antistatic mat
10.Slide the DVD super-multi drive into the front of the chassis until it seats
11.Connect the motherboard/SAS backplane cable to the DVD super-multi drive
12.Install the upper cable retainer
13.Install the bezel
14.Install the rear cover
15.Powering on the system

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTIONS ARE REQUIRED TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

PARTS NOTE:

https://support.oracle.com/handbook_private/Systems/SunFireV245/components.html#RemovableMedia

REFERENCE INFORMATION:

Service Manual.
http://download.oracle.com/docs/cd/E19088-01/

This solution has no attachment