| Asset ID: |
1-71-1310407.1 |
| Update Date: | 2017-11-30 |
| Keywords: | |
Solution Type
Technical Instruction Sure
Solution
1310407.1
:
How to Replace a V245 Front I/O Board Assembly:ATR:1253:1
| Related Categories |
- PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
|
In this Document
Oracle Confidential INTERNAL - Do not distribute to customer (OracleConfidential).
Reason: FRU CAP
Applies to:
Sun Fire V245 Server - Version Not Applicable and later
Information in this document applies to any platform.
Goal
How to replace a V245 Front I/O Board Assy
Solution
*DISPATCH INSTRUCTIONS*
WHAT SKILLS DOES THE ENGINEER NEED:
Nothing beyond basic product training.
TIME ESTIMATE: 40 minutes
TASK COMPLEXITY: 1
*FIELD ENGINEER INSTRUCTIONS*
PROBLEM OVERVIEW:
Front IO Board Assembly is faulty.
WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :
A data backup is not a pre-requisite but is a wise precaution
Customer should conduct an orderly software system shutdown
Power down System & disconnect Power Cords
WHAT ACTION DOES THE ENGINEER NEED TO TAKE:
Follow standard ESD procedures to avoid Electrostatic Discharge
1. Power off the system.
2. Remove the rear cover.
3. Remove the air baffle.
4. Remove the bezel.
5. Remove the front cover.
6. Remove the motherboard to front I/O board cable.
This cable connects the front I/O and motherboards.
7. Remove all six fan trays.
8. Remove the fan tray connector boards from the front I/O board.
9. Remove the front indicator board.
10. Remove the front I/O board
11. Unpackage the front I/O board and place it on an antistatic mat.
12. Tip the front I/O board downwards and slightly forward.
13. Push I/O board into place, aligning the board with the chassis.
When the board is fully seated the USB port is mounted flush against the front of
the chassis assembly.
14. Reinstall the front indicator board.
15. Reinstall the fan tray connector boards.
16. Reinstall all six fan trays.
17. Reinstall the motherboard to front I/O board cable
18. Reinstall the air baffle.
OBTAIN CUSTOMER ACCEPTANCE
WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:
Boot the system and start the application as per the sys admin procedure
PARTS NOTE:
Sun Fire V245
https://mosemp.us.oracle.com/handbook_internal/Systems/SunFireV245/components.html
REFERENCE INFORMATION:
Sun Fire V215 and V245 Servers Service Manual
Attachments
This solution has no attachment
