| Asset ID: |
1-71-1310343.1 |
| Update Date: | 2017-11-30 |
| Keywords: | |
Solution Type
Technical Instruction Sure
Solution
1310343.1
:
How to Remove and Replace a 450 DVD:ATR:1701:1
| Related Items |
- Sun Enterprise 450 Server
|
| Related Categories |
- PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
|
In this Document
Oracle Confidential INTERNAL - Do not distribute to customer (OracleConfidential).
Reason: FRU CAP
Applies to:
Sun Enterprise 450 Server - Version Not Applicable and later
Information in this document applies to any platform.
Goal
450 DVD Replacement
Solution
DISPATCH INSTRUCTIONS
WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
SE450 product knowledge/training to be qualified as Oracle service personel.
TIME ESTIMATE: 45 minutes:
TASK COMPLEXITY: 1
FIELD ENGINEER INSTRUCTIONS
PROBLEM OVERVIEW: DVD Failure
WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :
The customer should conduct an orderly software system shutdown. Then power down the system and disconnect the Power Cord. Then Position the System for Service, Remove the System Cover, Avoid Electrostatic Discharge and Remove the Removable Media Assembly (RMA).
WHAT ACTION DOES THE ENGINEER NEED TO TAKE:
1) Remove a DVD Drive
1. Remove the four screws securing the drive to the removable media assembly.
2. Slide the drive out from the front of its bay in the removable media assembly.
3. Place the drive on an antistatic mat.
2) Install a DVD Drive
1. If necessary, remove the plastic filler panel from the removable media assembly plastic cover.
2. If you are replacing a defective drive, make sure that the jumper settings on the new drive match the settings on the old drive.
Note: Setting the SCSI Target ID
Your DVD-ROM device is factory set to SCSI target ID 6. You can also set the SCSI ID on a drive that is installed into a device using a target ID selector switch with a flex cable.
3. Slide the DVD drive into its drive bay.
4. Insert and tighten the four flat-head Phillips screws that secure the drive in its bay.
OBTAIN CUSTOMER ACCEPTANCE
WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:
Restart software applications per applicable administration guides to resume system operation.
PARTS NOTE:
1. The minimum CD-ROM mode operating system is Solaris 2.5.1.
2. The minimum DVD-ROM mode operating system is Solaris 8.
3. The M1401 model requires patch to run on Solaris.
4. The M1401 reached end of production in August 2003.
5. The M1401 was replaced with the M1711 in August 2003.
6. Performance specifications for the M1711 exceed those of the M1401.
For more detail, refer to http://support.us.oracle.com/handbook_internal/Devices/Removable_Media/RMVBL_10X_DVD_ROM.html
REFERENCE INFORMATION:
Refer to contents of corresponding product in System Handbook.
http://docs.oracle.com/cd/E19088-01/450.srvr/805-0429-10/805-0429-10.pdf
Attachments
This solution has no attachment
