| Asset ID: |
1-71-1310314.1 |
| Update Date: | 2017-11-30 |
| Keywords: | |
Solution Type
Technical Instruction Sure
Solution
1310314.1
:
How to Remove and Replace a Sun Enterprise 450 CPU Module:ATR:1368:1
| Related Items |
- Sun Enterprise 450 Server
|
| Related Categories |
- PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
|
In this Document
Oracle Confidential INTERNAL - Do not distribute to customer (OracleConfidential).
Reason: FRU CAP
Applies to:
Sun Enterprise 450 Server - Version Not Applicable and later
Information in this document applies to any platform.
Goal
450 CPU Module
Solution
DISPATCH INSTRUCTIONS
WHAT SKILLS DOES THE ENGINEER NEED:
Nothing beyond basic product training.
TIME ESTIMATE: 50 minutes
TASK COMPLEXITY: 1
FIELD ENGINEER INSTRUCTIONS
PROBLEM OVERVIEW: CPU Module replacement
WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :
The customer should conduct an orderly software system shutdown. Then power down the system and disconnect the Power Cord. Then Position the System for Service, Remove the Left side panel, Avoid Electrostatic Discharge.
WHAT ACTION DOES THE ENGINEER NEED TO TAKE:
Removal:
1. Locate on the main logic board the CPU module that you want to remove.
2. Lift the ejection levers away from the CPU module to release it from the CPU cage. The ejection levers are located on each side of the CPU module. Using both thumbs, push the levers away from the CPU module.
3. Pull evenly on the corners of the CPU module and slide it all the way out of the CPU cage.
4. Place the CPU module on an antistatic mat.
Installation:
1. On the main logic board, locate the slot for the CPU module that you are installing.
2. Align the edges of the CPU board with the grooves on the CPU cage.
3. Slide the CPU module evenly into the CPU slot on the main logic board.
Push on both sides of the CPU module until it is firmly seated in the slot.
4. Hook each ejection lever onto its side of the CPU cage.
5. Push the ejection levers toward the center of the module.
6. Install Left Side Panel
OBTAIN CUSTOMER ACCEPTANCE
WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:
Restart system and software applications per applicable administration guides to resume system operation.
PARTS NOTE:
https://mosemp.us.oracle.com/handbook_internal/Systems/E450/components.html#CPUModule
REFERENCE INFORMATION:
Ultra Enterprise 450 Server Owner's Guide
http://download.oracle.com/docs/cd/E19088-01/450.srvr/805-0429-10/805-0429-10.pdf
Attachments
This solution has no attachment
