Sun Fire V215 Server
 
Sun Fire V245 Server
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
 

In this Document

Goal

Solution

Applies to:

Goal

How to replace a V215/V245 Power Cord Kit

Solution

*DISPATCH INSTRUCTIONS*

WHAT SKILLS ARE REQUIRED
No special skills required, Customer Replaceable Unit (CRU) procedure

TIME ESTIMATE: 15 minutes

TASK COMPLEXITY: 0

*REMOVAL/REPLACEMENT INSTRUCTIONS*

PROBLEM OVERVIEW:
Faulty Power Cord

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

A data backup is not a pre-requisite but is a wise precaution.
The customer is not required to perform a system shutdown.

WHAT ACTIONS ARE REQUIRED:

1. Identify which power cord you will replace. Each power supply has three LEDs that you can view from the rear of the server:

Top LED is on (green): Power supply is operating properly
Middle LED is on (amber): Power supply is faulty and should be replaced
Bottom LED is on (green): Power source to power supply is operating properly

2. Disconnect the power cord from the power supply that you are replacing
3. Install replacement power cord

WHAT ACTIONS ARE REQUIRED TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

Check that LEDs show PSU for which cord was replaced is functioning.

PARTS NOTE:

Sun Fire V215

https://support.oracle.com/handbook_private/Systems/SunFireV215/components.html

Sun Fire V245

https://support.oracle.com/handbook_private/Systems/SunFireV245/components.html

REFERENCE INFORMATION:

Sun Fire V215 and V245 Servers Service Manual
http://download.oracle.com/docs/cd/E19088-01/v245.srvr/819-3038-11/819-3038-11.pdf

This solution has no attachment