Sun SPARC Enterprise T5220 Server
 
Sun SPARC Enterprise T5120 Server
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
 
Microlearning>Video>ML-VID-VCAP
 

In this Document

Goal

Solution

Oracle Confidential PARTNER - Available to partners (SUN).
Reason: FRU CAP

Applies to:

Goal

 How to Replace a Sun SPARC Enterprise T5120/T5220 DVD USB Assembly

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE FIELD ENGINEER/ADMINISTRATOR NEED:

T5120/T5220 training recommended

TIME ESTIMATE: 30 minutes

Task Complexity: 1

FIELD ENGINEER/ADMINISTRATOR INSTRUCTIONS

PROBLEM OVERVIEW:

Defective DVD or USB assembly

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

A data backup is not a pre-requisite but is a wise precaution. System needs to be shutdown by customer.

NOTE: When a server is power cycled with DVD media installed, the message "Device is gone" may be displayed approximately 30 minutes after the OS is booted up. Ignore the message, no DVD replacement is needed. This is a known issue (CR6840287) on page 8 of the T5120/T5220 server Product Notes http://docs.oracle.com/cd/E19637-01/E21877/E21877.pdf.

WHAT ACTION DOES THE FIELD ENGINEER/ADMINISTRATOR NEED TO TAKE:

*** Follow standard ESD procedures to avoid Electrostatic Discharge

1. Power off the server
2. Unplug the power cords
3. Remove one of the hard drive that is under DVD/USB module
4-disk capable backplane: remove HDD3
8-disk capable backplane: remove HDD7
16-disk capable backplane: remove HDD13
4. Release the DVD/USB module from the hard drive backplane using the finger indentation in the removed hard drive bay to extend the release tab
5. Slide the DVD/USB module out of the hard drive cage

*Warning*
There are two different DVD/USB assembly. One is SATA the other PATA and they are not interchangeable.
Check that you have the right part before inserting the replacement assembly

6. Slide the DVD/USB module into the front of the chassis until it seats
7. Slide the pull tab back into the system
8. Install the hard drive you removed, plug in the power cords and power on the system

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE FIELD ENGINEER/ADMINISTRATOR NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

n/a

PARTS NOTE:

There are two different DVD/USB assembly. One is SATA the other PATA and they are not interchangeable

https://support.oracle.com/handbook_partner/Systems/SE_T5120/components.html

https://support.oracle.com/handbook_partner/Systems/SE_T5220/components.html

REFERENCE INFORMATION:

Sun SPARC Enterprise T5120 and T5220 Servers Service Manual -
http://download.oracle.com/docs/cd/E19839-01/

Save

This solution has no attachment