Sun Fire T2000 Server
 
Sun SPARC Enterprise T2000 Server
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
 

In this Document

Goal

Solution

Oracle Confidential PARTNER - Available to partners (SUN).
Reason: FRU CAP

Applies to:

Goal

How to Remove and Replace a Sun Fire T2000 Cable Kit

Solution

*DISPATCH INSTRUCTIONS*

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
Basic Sun hardware FE skills, familiarity or training for T2000 platform.

TIME ESTIMATE: 30 minutes

TASK COMPLEXITY: 1

*FIELD ENGINEER INSTRUCTIONS*

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

Customer should shut the operating system down gracefully (using "init 5"), and after the system has shut down run the following commands from the ALOM:

1. setlocator on
2. poweroff


WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

1. Verify the system has been shut down by the customer.

2. Gain access to the top of the server. If it is necessary to slide the server forward, ensure adequate cable management is in place so that cables do not become disconnected or damaged.

3. Open the top cover, following ESD procedures.

4. Replace faulty cable or cables as specified.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE: N/A

PARTS NOTE:

Sun Fire T2000

https://support.oracle.com/handbook_partner/Systems/SunFireT2000/components.html

Sun Fire T2000 (RoHS)

https://support.oracle.com/handbook_partner/Systems/SunFireT2000_R/components.html

Sun SPARC Enterprise T2000

https://support.oracle.com/handbook_partner/Systems/SE_T2000/components.html

REFERENCE INFORMATION:

Sun Fire T2000 Server Service Manual, p/n 819-2548

Sun SPARC Enterprise T2000 Server Service Manual, p/n 819-7989

This solution has no attachment