Sun Microsystems, Inc.  Oracle System Handbook - ISO 7.0 May 2018 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1307436.1
Update Date:2016-05-03
Keywords:

Solution Type  Technical Instruction Sure

Solution  1307436.1 :   How to Remove and Replace a Sun Fire/Sun Enterprise T2000 Power Cord Kit:ATR:1162:0  


Related Items
  • Sun Fire T2000 Server
  •  
  • Sun SPARC Enterprise T2000 Server
  •  
Related Categories
  • PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
  •  




In this Document
Goal
Solution


Applies to:

Sun Fire T2000 Server - Version Not Applicable and later
Sun SPARC Enterprise T2000 Server - Version Not Applicable and later
Information in this document applies to any platform.

Goal

How to Remove and Replace a Sun Fire T2000 Power Cord Kit

Solution

*DISPATCH INSTRUCTIONS*

WHAT SKILLS ARE REQUIRED
No special skills required, Customer Replaceable Unit (CRU) procedure

TIME ESTIMATE: 30 minutes

TASK COMPLEXITY: 0

REMOVAL/REPLACEMENT INSTRUCTIONS

PROBLEM OVERVIEW:
T2000 Power Cord Kit replacement

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

DAMAGE ALERT: Perform a visual inspection of the replacement part to make sure that there are no damaged components, connectors, bent pins, damaged packages during shipping, etc. If the part is damaged, don't install it into the system, order a new part. Handle with caution and package carefully the return part to avoid any damages during shipping.


Server has two power cords with dual power supply redundancy. The server can remain running if replacing only one power cord. If, not Customer should shut the operating system down gracefully (using "init 0"), and after the system has shut down run the following commands from the ALOM:
1. setlocator on
2. poweroff

WHAT ACTIONS ARE REQUIRED:
Remove the power cable:
1. Verify the system has been shut down by the customer.
2. Replace power cable.OBTAIN CUSTOMER ACCEPTANCE

*OBTAIN CUSTOMER ACCEPTANCE*
WHAT ACTIONS ARE REQUIRED TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:
Restart system and have the System administrator verify functionality of system.

PARTS NOTE:

Sun Fire T2000

https://support.oracle.com/handbook_private/Systems/SunFireT2000/components.html

Sun Fire T2000 (post July 2006)

https://support.oracle.com/handbook_private/Systems/SunFireT2000_R/SunFireT2000_R.html

 

Sun Enterprise T2000

https://support.oracle.com/handbook_private/Systems/SE_T2000/components.html



REFERENCE INFORMATION:

Sun Fire T2000 Server Service Manual, p/n 819-2548

Sun SPARC Enterprise T2000 Server Service Manual, , p/n 819-7989


Attachments
This solution has no attachment
  Copyright © 2018 Oracle, Inc.  All rights reserved.
 Feedback