Sun SPARC Enterprise T5240 Server
 
Sun SPARC Enterprise T5140 Server
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
 

In this Document

Goal

Solution

Applies to:

Goal

How to remove and replace a T5140/T5240 System Board Battery

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS ARE REQUIRED?: No special skills required, Customer Replaceable Unit (CRU) procedure 

TIME ESTIMATE: 120 minutes

Task Complexity: 0

REMOVAL/REPLACEMENT INSTRUCTIONS:

PROBLEM OVERVIEW:

System Board Battery Failure

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY?:

The customer should conduct an orderly software system shutdown. Then power down the system and disconnect the Power Cord.

WHAT ACTIONS ARE REQUIRED?:

1) Remove a Battery

1. Remove PCIe/XAUI riser 2.

2. Using a No. 1 flat-blade screwdriver, press the latch and remove the battery from the motherboard.

2) Install a Battery

1. Unpack the replacement battery.

2. Pry the clip open slightly and insert the battery into the battery holder.

3. Install PCIe/XAUI riser 2.

4. Use the ILOM setdate command to set the day and time.

5. After returning the server to operation, check and reset the Solaris OS date.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTIONS ARE REQUIRED TO RETURN THE SYSTEM TO AN OPERATIONAL STATE?:

Verify functionality, no service LEDs or error messages.

PARTS NOTE:

https://support.oracle.com/handbook_private/Systems/SE_T5140/components.html#Batteries

https://support.oracle.com/handbook_private/Systems/SE_T5240/components.html#Batteries

REFERENCE INFORMATION:

Sun SPARC Enterprise T5140 and T5240 Servers Service Manual
http://download.oracle.com/docs/cd/E19910-01/820-3318-14/820-3318-14.pdf

This solution has no attachment