Sun Fire V480 Server
 
Sun Fire V490 Server
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
 
Microlearning>Video>ML-VID-VCAP
 

In this Document

Goal

Solution

Applies to:

Goal

******************************************************************************
To report errors or request improvements on this procedure,
please go to https://support.oracle.com and put a comment on Doc ID: 1306184.1
******************************************************************************

How to Remove and Replace a V480/V490 AC Power Cord

Solution

DISPATCH INSTRUCTIONS
- WHAT SKILLS DOES THE FIELD ENGINEER/ADMINISTRATOR NEED?:
Basic Hardware skills

- TIME ESTIMATE: 10  min
- TASK COMPLEXITY:    0

FIELD ENGINEER/ADMINISTRATOR INSTRUCTIONS:
- PROBLEM OVERVIEW:
Power Cord failed.

- WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE
RESOLUTION ACTIVITY?:
A data backup is not a prerequisite but is a wise precaution. The customer is not required to perform a system shutdown.

- WHAT ACTION DOES THE ENGINEER NEED TO TAKE:
The Sun Fire V480/V490 server has redundant power supplies each with its own power cord. You can swap one power cord while the other one is still running. For a single power source configuration, the system should be already powered down before replace the bad power cord.


OBTAIN CUSTOMER ACCEPTANCE
- WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO
AN OPERATIONAL STATE:
If the replacement was a hot swap on a redundant configuration, the system should be operational and need no further work.

If the replacement was in a system with a single power source, restart software applications per applicable administration guides to resume system operation.


PARTS NOTE:
Refer to the System Handbook for the country specific type of power cord.

REFERENCE INFORMATION:
Service Manual V480 "Servicing Cables"
Service Manual V490 "Servicing Cables"

This solution has no attachment