Sun Fire X4200 M2 Server
 
Sun Fire X4100 Server
 
Sun Fire X4200 Server
 
Sun Fire X4100 M2 Server
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: x64-CAP VCAP
 
Microlearning>Video>ML-VID-VCAP
 

In this Document

Goal

Solution

Applies to:

Goal

How to Replace a Sun Fire X4100, X4100 M2, X4200, X4200 M2 Fan Module.

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE FIELD ENGINEER/ADMINISTRATOR NEED:
No special skills required, Customer Replaceable Unit (CRU) procedure

TIME ESTIMATE: 30 minutes

TASK COMPLEXITY: 0

FIELD ENGINEER/ADMINISTRATOR INSTRUCTIONS:

PROBLEM OVERVIEW: A Sun Fire X4100, X4100 M2, X4200, X4200 M2 Fan Module needs replacement

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

This component is a hot-swappable CRU

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

1. Open the door to the fan bay and identify the defective fan module.

-Fan module LED lit: The fan module is faulty and should be replaced.
-Fan module LED off: The fan module is operating properly.

2. While holding the fan bay door open, grasp the faulty fan module by its plastic strap and lift it straight up out of the fan bay.

3. Visibly inspect the remaining fans and all air openings for dirt, and advise customer if cleaning is necessary.

4. Installation is the reverse of this procedure.

Caution - When you open the fan bay door, be careful to hold it open with one hand so that it does not spring shut and injure your fingers. Do not hold the fan bay door open for more than 60 seconds while the server is running to avoid overheating the server

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

None

PARTS NOTE:

N/A

REFERENCE INFORMATION:

http://download.oracle.com/docs/cd/E19121-01/sf.x4200/index.html

This solution has no attachment