| Asset ID: |
1-71-1305752.1 |
| Update Date: | 2017-11-30 |
| Keywords: | |
Solution Type
Technical Instruction Sure
Solution
1305752.1
:
How To Remove and Replace V210 Power Cord:ATR:843:0
| Related Categories |
- PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
|
In this Document
Applies to:
Sun Fire V210 Server - Version Not Applicable and later
Information in this document applies to any platform.
Goal
How To Remove and Replace V210 Power Cord
Solution
DISPATCH INSTRUCTIONS
WHAT SKILLS ARE REQUIRED:
No special skills required, Customer Replaceable Unit (CRU) procedure
Time Estimate: 15 minutes
Task Complexity: 0
REMOVAL/REPLACEMENT INSTRUCTIONS
Power Cord failed.
WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :
The Sun Fire V210 server has a single power supply therefore the system will required to be orderly shutdown and powered off.
WHAT ACTIONS ARE REQUIRED:
Replace the bad power cord.
OBTAIN CUSTOMER ACCEPTANCE
WHAT ACTIONS ARE REQUIRED TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:
Restart software applications per applicable administration guides to resume system operation.
PARTS NOTE:
Refer to the System Handbook for the country specific type of power cord.
https://support.oracle.com/handbook_private/Systems/SunFireV210/components.html
https://support.oracle.com/handbook_private/Systems/SunFireV210_R/components.html
REFERENCE INFORMATION:
Service Manual and Administration Guide
http://download.oracle.com/docs/cd/E19088-01/
Attachments
This solution has no attachment
