Sun SPARC Enterprise T5220 Server
 
Sun SPARC Enterprise T5120 Server
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
 

In this Document

Goal

Solution

Applies to:

Goal

How to Remove and Replace a T5120 Power Cord Kit

***************************************************************************************
To report errors or request improvements on this procedure, please Add a Comment on Doc ID: 1305290.1
***************************************************************************************

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS ARE REQUIRED?: No special skills required, Customer Replaceable Unit (CRU) procedure

TIME ESTIMATE: 30 minutes

Task Complexity: 0 

REMOVAL/REPLACEMENT INSTRUCTIONS:

PROBLEM OVERVIEW:  Faulty Power Cord

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

A data backup is not a pre-requisite but is a wise precaution.
Server has two power cords with dual power supply redundancy the server can remain running if replacing only one power cord. If, Customer should shut the operating system down gracefully (using "init 0"), and after the system has shut down Switch from the system console to the -> prompt by typing the #. (Hash Period) key sequence.
At the -> prompt, type the stop /SYS command.

WHAT ACTIONS ARE REQUIRED?:

Remove the power cable:

1. Verify the system has been shut down by the customer.

2. Replace power cable.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTIONS ARE REQUIRED TO RETURN THE SYSTEM TO AN OPERATIONAL STATE?:
Power on and boot system verify system fully operational.

PARTS NOTE:
https://support.oracle.com/handbook_private/Systems/SE_T5120/components.html

REFERENCE INFORMATION:

Sun SPARC Enterprise T5120 and T5220 Servers Service Manual
http://download.oracle.com/docs/cd/E19839-01/

This solution has no attachment