How to Replace the Snap-In SPARC T3-1 Rack Mount Kit:ATR:2563:0

Asset ID:	1-71-1299296.1
Update Date:	2016-04-28
Keywords:

Solution Type Technical Instruction Sure

Solution 1299296.1 : How to Replace the Snap-In SPARC T3-1 Rack Mount Kit:ATR:2563:0

Applies to:

SPARC T3-1 - Version Not Applicable and later
Information in this document applies to any platform.

Goal

Service a SPARC T3-1 Snap-In Rack Mount Kit

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS ARE REQUIRED
No special skills required, Customer Replaceable Unit (CRU) procedure

Time Estimate: 60 minutes
Task Complexity: 1

REMOVAL/REPLACEMENT INSTRUCTIONS

PROBLEM OVERVIEW: RACK MOUNT KIT - TOOL LESS REPLACEMENT

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

DAMAGE ALERT: Perform a visual inspection of the replacement part to make sure that there are no damaged components, connectors, bent pins, damaged packages during shipping, etc. If the part is damaged, don't install it into the system, order a new part. Handle with caution and package carefully the return part to avoid any damages during shipping.

WHAT ACTIONS ARE REQUIRED:
Install the Snap-In Slide Rail Assemblies

1. Pull both mounting brackets completely out of their respective slide rails.
a. Simultaneously press and hold the upper and lower lock buttons of the slide rail lock.
b. Pull the mounting bracket out until it stops.
c. Slide the mounting bracket release button to the left, then slide the mounting bracket completely out of the slide rail.

2. Attach a mounting bracket to the right side of the server chassis.
a. Position the mounting bracket against the chassis. Ensure that the slide rail lock is at the front and the keyed openings on the mounting bracket are aligned with the locating pins on the side of the chassis.
b. Ensure that the heads of the four locating pins protrude through the keyed openings in the mounting bracket. Slide the mounting bracket toward the front of the chassis until the bracket locks into place with an audible click.
c. Verify that all four locating pins are trapped in the keyed openings and that the third locating pin from the front has engaged the mounting bracket lock.

3. Attach the second mounting bracket to the left side of the server chassis.

4. Orient the slide rails, ensuring that the ball bearing tracks (labeled FRONT) are forward.

5. Extend the slide rails (outer section) to fit the rack and attach the slide rails to the rack.
You hear an audible click when the rails securely attach to the rack.
Caution – Deploy the antitilt feature on the rack before continuing the installation.

OBTAIN CUSTOMER ACCEPTANCE
WHAT ACTIONS ARE REQUIRED TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

PARTS DETAILS:

https://support.oracle.com/handbook_private/Systems/SPARC_T3_1/components.html#Rack

REFERENCE INFORMATION:

SPARC T3-1 Service Manual, p/n E21416

Attachments

This solution has no attachment