Sun Microsystems, Inc.  Oracle System Handbook - ISO 7.0 May 2018 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1299286.1
Update Date:2016-04-28
Keywords:

Solution Type  Technical Instruction Sure

Solution  1299286.1 :   How to Replace a SPARC T3-1 Serpa Cable Kit:ATR:2561:1  


Related Items
  • SPARC T3-1
  •  
Related Categories
  • PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
  •  




In this Document
Goal
Solution


Oracle Confidential PARTNER - Available to partners (SUN).
Reason: FRU CAP

Applies to:

SPARC T3-1 - Version Not Applicable and later
Information in this document applies to any platform.

Goal

How to service the SPARC T3-1 (Serpa) cable kit 

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
Basic partner training to be qualified as a Sun Service Delivery Partner

Time Estimate: 60 minutes

FIELD ENGINEER INSTRUCTIONS

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

DAMAGE ALERT: Perform a visual inspection of the replacement part to make sure that there are no damaged components, connectors, bent pins, damaged packages during shipping, etc. If the part is damaged, don't install it into the system, order a new part. Handle with caution and package carefully the return part to avoid any damages during shipping.


System needs to be shutdown by customer

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:
*** Follow standard ESD procedures to avoid Electrostatic Discharge

1. Power off server
2. Disconnect all power cables
3. Disconnect any data cables connected to any PCIe/XAUI card if needed
4. Remove the Top Cover
1. Unlatch fan module door:Pull release tabs back to release door
2. Press the top cover release button and slide the top cover to the rear about a 0.5 inch
3. Lift up and remove the cover
5. Replace cables routing them as they were before
6. After replacement reverse the order of fixing as mentioned in above points

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:
Have customer check all disks access

PARTS DETAILS:

https://support.oracle.com/handbook_partner/Systems/SPARC_T3_1/components.html


REFERENCE INFORMATION: SPARC T3-1 Service Manual, p/n E21416


Attachments
This solution has no attachment
  Copyright © 2018 Oracle, Inc.  All rights reserved.
 Feedback