| Asset ID: |
1-71-1293790.1 |
| Update Date: | 2016-03-31 |
| Keywords: | |
Solution Type
Technical Instruction Sure
Solution
1293790.1
:
How to Replace the M3000 Power Cord Kit:ATR:2502:0
| Related Items |
- Sun SPARC Enterprise M3000 Server
|
| Related Categories |
- PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
|
In this Document
Applies to:
Sun SPARC Enterprise M3000 Server - Version Not Applicable and later
Information in this document applies to any platform.
Goal
CAP PROBLEM OVERVIEW: Faulty Power Cord replacement
********************************************************************************
To report errors or request improvements on this procedure,
please go to http://support.us.oracle.com and put a comment on Doc ID: 1293790.1
********************************************************************************
Solution
DISPATCH INSTRUCTIONS
WHAT SKILLS ARE REQUIRED?: No special skills required, Customer Replaceable Unit (CRU) procedure
TASK COMPLEXITY: 0
Time Estimate: 30 minutes
REMOVAL/REPLACEMENT INSTRUCTIONS:
WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :
A data backup is not a prerequisite but is a wise precaution.
The customer is not required to perform a system shutdown.
WHAT ACTIONS ARE REQUIRED?:
Before removing power cords please review <Document 1021044.1> to prevent extended outages.
1. Identify which power cord you will replace.
The power inlets are numbered from 0 on the right hand side when viewed from the rear.
2. Disconnect the power cord from the power inlet that you are replacing
3. Install replacement power cord
WHAT ACTION ARE NEEDED TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:
Check PSU LEDs to show that replaced power cord is functioning
PARTS NOTE:
REFERENCE INFORMATION:
http://download.oracle.com/docs/cd/E19867-01/820-5683-13/820-5683-13.pdf
Attachments
This solution has no attachment
