![]() | Oracle System Handbook - ISO 7.0 May 2018 Internal/Partner Edition | ||
|
|
![]() |
||||||||||||||
Solution Type Technical Instruction Sure Solution 1272707.1 : How to Replace a DVD for Sun Fire V1280/E2900 and Netra 1280/1290 [VCAP]
In this Document
Oracle Confidential PARTNER - Available to partners (SUN). Applies to:Sun Netra 1290 Server - Version All Versions to All Versions [Release All Releases]Sun Netra 1280 Server - Version All Versions to All Versions [Release All Releases] Sun Fire E2900 Server - Version All Versions to All Versions [Release All Releases] Sun Fire V1280 Server - Version All Versions to All Versions [Release All Releases] Information in this document applies to any platform. GoalHow to Replace a DVD for Sun Fire V1280/E2900 and Netra 1280/1290 Solution****************************************************************************** DISPATCH INSTRUCTIONS
WHAT SKILLS DOES THE FIELD ENGINEER/ADMINISTRATOR NEED: Engineer should be LW8 product trained
TIME ESTIMATE: 60 minutes TASK COMPLEXITY: 1
FIELD ENGINEER/ADMINISTRATOR INSTRUCTIONS PROBLEM OVERVIEW: How to replace a DVD media
WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :
Take the system to Standby mode by typing the shutdown command at the lom>prompt.
WHAT ACTION DOES THE FIELD ENGINEER/ADMINISTRATOR NEED TO TAKE?:
Use proper ESD grounding techniques when handling components.
1.Take the system to Standby mode.
2. Open the right front door of the system.
3. Attach a wrist strap. Place a grounded ESD mat close to the system.
4. Open the media bay access door at the top of the system. Loosen the latch securing screw. Lift the latch and raise the cover.
5. Inside the media bay, push the metal latch to the right.
6. Disconnect the DVD-ROM drive from the backplane connector. Firmly pull the DVD-ROM drive from the front of the system.
7. Place the drive on an ESD mat.
8. Insert the new DVD-ROM drive into the system until the latch engages.
9. Close the media bay access door and tighten the latch securing screw.
10. Detach the antistatic wrist strap.
11. Close the front door of the system.
WHAT ACTION DOES THE FIELD ENGINEER/ADMINISTRATOR NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE?:
Verify the Operating system is operational
Restart the applications
REFERENCE INFORMATION: Attachments This solution has no attachment |
||||||||||||||
|