How to Replace an AC Power Cord for Sun Fire V1280/E2900 and Netra 1280/1290 [VCAP]

Asset ID:	1-71-1271921.1
Update Date:	2017-10-18
Keywords:

Solution Type Technical Instruction Sure

Solution 1271921.1 : How to Replace an AC Power Cord for Sun Fire V1280/E2900 and Netra 1280/1290 [VCAP]

Applies to:

Sun Fire E2900 Server - Version All Versions to All Versions [Release All Releases]
Sun Fire V1280 Server - Version All Versions to All Versions [Release All Releases]
Sun Netra 1280 Server - Version All Versions to All Versions [Release All Releases]
Sun Netra 1290 Server - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.

Goal

How to Replace an AC Power Cord for Sun Fire V1280/E2900 and Netra 1280/1290

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS ARE REQUIRED?: No special skills required, Customer Replaceable Unit (CRU) procedure
TIME ESTIMATE: 30 minutes
TASK COMPLEXITY: 0

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY?:
The E2900 has redundant power feeds, therefore, no shutdown is required for a single power cord failure.

REMOVAL/REPLACEMENT INSTRUCTIONS:
PROBLEM OVERVIEW: Power cord failed
WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY?:
WHAT ACTIONS ARE REQUIRED?: Replace the bad power cord.

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:
If the replacement was a hot swap on a redundant configuration, the system should be operational and need no further work.

Restart software applications per applicable administration guides to resume system operation.

REFERENCE INFORMATION:

Refer to the System Handbook for the country specific type of power cord.
Sun Fire V1280/Netra 1280 Systems Service Manual (pdf)
Sun Fire E2900 System Service Manual (pdf)
Netra 1290 Server Service Manual (pdf)

Attachments

This solution has no attachment